######################## Filebeat Configuration ############################

# This file is a full configuration example documenting all non-deprecated
# options in comments. For a shorter configuration example, that contains only
# the most common options, please see filebeat.yml in the same directory.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html


#==========================  Modules configuration =============================
filebeat.modules:

#-------------------------------- System Module --------------------------------
#- module: system
  # Syslog
  #syslog:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Use journald to collect system logs
    #var.use_journald: false

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Authorization logs
  #auth:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Use journald to collect auth logs
    #var.use_journald: false

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#------------------------------- ActiveMQ Module -------------------------------
- module: activemq
  # Audit logs
  audit:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  # Application logs
  log:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#-------------------------------- Apache Module --------------------------------
#- module: apache
  # Access logs
  #access:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Error logs
  #error:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#-------------------------------- Auditd Module --------------------------------
#- module: auditd
  #log:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#--------------------------------- AWS Module ---------------------------------
- module: aws
  cloudtrail:
    enabled: false

    # AWS SQS queue url
    #var.queue_url: https://sqs.myregion.amazonaws.com/123456/myqueue

    # AWS S3 bucket arn
    #var.bucket_arn: 'arn:aws:s3:::mybucket'

    # AWS S3 list prefix
    #var.bucket_list_prefix: 'prefix'

    # Bucket list interval on S3 bucket
    #var.bucket_list_interval: 300s

    # Number of workers on S3 bucket or SQS queue
    #var.number_of_workers: 5

    # Process CloudTrail logs
    # default is true, set to false to skip Cloudtrail logs
    # var.process_cloudtrail_logs: false

    # Process CloudTrail Digest logs
    # default true, set to false to skip CloudTrail Digest logs
    # var.process_digest_logs: false

    # Process CloudTrail Insight logs
    # default true, set to false to skip CloudTrail Insight logs
    # var.process_insight_logs: false

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # The duration that the received messages are hidden from ReceiveMessage request
    # Default to be 300s
    #var.visibility_timeout: 300s

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # Default region to query if no other region is set
    #var.default_region: us-east-1

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # Enabling this option changes the service name from `s3` to `s3-fips` for connecting to the correct service endpoint.
    #var.fips_enabled: false

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

  cloudwatch:
    enabled: false

    # AWS SQS queue url
    #var.queue_url: https://sqs.myregion.amazonaws.com/123456/myqueue

    # AWS S3 bucket arn
    #var.bucket_arn: 'arn:aws:s3:::mybucket'

    # AWS S3 list prefix
    #var.bucket_list_prefix: 'prefix'

    # Bucket list interval on S3 bucket
    #var.bucket_list_interval: 300s

    # Number of workers on S3 bucket or SQS queue
    #var.number_of_workers: 5

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # The duration that the received messages are hidden from ReceiveMessage request
    # Default to be 300s
    #var.visibility_timeout: 300s

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # Default region to query if no other region is set
    #var.default_region: us-east-1

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # Enabling this option changes the service name from `s3` to `s3-fips` for connecting to the correct service endpoint.
    #var.fips_enabled: false

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

  ec2:
    enabled: false

    # AWS SQS queue url
    #var.queue_url: https://sqs.myregion.amazonaws.com/123456/myqueue

    # AWS S3 bucket arn
    #var.bucket_arn: 'arn:aws:s3:::mybucket'

    # AWS S3 list prefix
    #var.bucket_list_prefix: 'prefix'

    # Bucket list interval on S3 bucket
    #var.bucket_list_interval: 300s

    # Number of workers on S3 bucket or SQS queue
    #var.number_of_workers: 5

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # The duration that the received messages are hidden from ReceiveMessage request
    # Default to be 300s
    #var.visibility_timeout: 300s

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # Default region to query if no other region is set
    #var.default_region: us-east-1

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # Enabling this option changes the service name from `s3` to `s3-fips` for connecting to the correct service endpoint.
    #var.fips_enabled: false

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

  elb:
    enabled: false

    # AWS SQS queue url
    #var.queue_url: https://sqs.myregion.amazonaws.com/123456/myqueue

    # AWS S3 bucket arn
    #var.bucket_arn: 'arn:aws:s3:::mybucket'

    # AWS S3 list prefix
    #var.bucket_list_prefix: 'prefix'

    # Bucket list interval on S3 bucket
    #var.bucket_list_interval: 300s

    # Number of workers on S3 bucket or SQS queue
    #var.number_of_workers: 5

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # The duration that the received messages are hidden from ReceiveMessage request
    # Default to be 300s
    #var.visibility_timeout: 300s

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # Default region to query if no other region is set
    #var.default_region: us-east-1

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # Enabling this option changes the service name from `s3` to `s3-fips` for connecting to the correct service endpoint.
    #var.fips_enabled: false

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

  s3access:
    enabled: false

    # AWS SQS queue url
    #var.queue_url: https://sqs.myregion.amazonaws.com/123456/myqueue

    # AWS S3 bucket arn
    #var.bucket_arn: 'arn:aws:s3:::mybucket'

    # AWS S3 list prefix
    #var.bucket_list_prefix: 'prefix'

    # Bucket list interval on S3 bucket
    #var.bucket_list_interval: 300s

    # Number of workers on S3 bucket or SQS queue
    #var.number_of_workers: 5

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # The duration that the received messages are hidden from ReceiveMessage request
    # Default to be 300s
    #var.visibility_timeout: 300s

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # Default region to query if no other region is set
    #var.default_region: us-east-1

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # Enabling this option changes the service name from `s3` to `s3-fips` for connecting to the correct service endpoint.
    #var.fips_enabled: false

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

  vpcflow:
    enabled: false

    # AWS SQS queue url
    #var.queue_url: https://sqs.myregion.amazonaws.com/123456/myqueue

    # AWS S3 bucket arn
    #var.bucket_arn: 'arn:aws:s3:::mybucket'

    # AWS S3 list prefix
    #var.bucket_list_prefix: 'prefix'

    # Bucket list interval on S3 bucket
    #var.bucket_list_interval: 300s

    # Number of workers on S3 bucket or SQS queue
    #var.number_of_workers: 5

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # The duration that the received messages are hidden from ReceiveMessage request
    # Default to be 300s
    #var.visibility_timeout: 300s

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # Default region to query if no other region is set
    #var.default_region: us-east-1

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # Enabling this option changes the service name from `s3` to `s3-fips` for connecting to the correct service endpoint.
    #var.fips_enabled: false

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

    # Specify a custom VPC flow log format.
    #var.format:

#----------------------------- AWS Fargate Module -----------------------------
- module: awsfargate
  log:
    enabled: false

    # Filename of AWS credential file
    # If not set "$HOME/.aws/credentials" is used on Linux/Mac
    # "%UserProfile%\.aws\credentials" is used on Windows
    #var.shared_credential_file: /etc/filebeat/aws_credentials

    # Profile name for aws credential
    # If not set the default profile is used
    #var.credential_profile_name: fb-aws

    # Use access_key_id, secret_access_key and/or session_token instead of shared credential file
    #var.access_key_id: access_key_id
    #var.secret_access_key: secret_access_key
    #var.session_token: session_token

    # Maximum duration before AWS API request will be interrupted
    # Default to be 120s
    #var.api_timeout: 120s

    # Custom endpoint used to access AWS APIs
    #var.endpoint: amazonaws.com

    # AWS IAM Role to assume
    #var.role_arn: arn:aws:iam::123456789012:role/test-mb

    # ARN of the log group to collect logs from
    #var.log_group_arn: arn:aws:logs:us-east-1:123456789012:log-group:test:*

    # Name of the log group to collect logs from
    #var.log_group_name: /ecs/test-log-group

    # Region that the specified log group belongs to
    #var.region_name: us-east-1

    # A list of strings of log streams names that Filebeat collect log events from
    #var.log_streams: ["/ecs/test-log-group/test-log-stream"]

    # A string to filter the results to include only log events from log streams that have names starting with this prefix
    #var.log_stream_prefix: /ecs/test-log-group/

    # Specify if Filebeat should read log files from the beginning or from the end
    # Default start_position is beginning
    #var.start_position: beginning

    # How often Filebeat checks for new log events from the specified log group
    # Default scan_frequency is 1 minute
    #var.scan_frequency: 1m

    # Time used to sleep between AWS FilterLogEvents API calls inside the same collection period
    # Default api_sleep is 200 ms
    #var.api_sleep: 200ms

    # URL to proxy AWS API calls
    #var.proxy_url: http://proxy:3128

    # Configures the SSL settings, ie. set trusted CAs, ignore certificate verification....
    #var.ssl:

#-------------------------------- Azure Module --------------------------------
- module: azure
  # All logs
  activitylogs:
    enabled: false
    var:
      # eventhub name containing the activity logs, overwrite he default value if the logs are exported in a different eventhub
      eventhub: "insights-operational-logs"
      # consumer group name that has access to the event hub, we advise creating a dedicated consumer group for the azure module
      consumer_group: "$Default"
      # the connection string required to communicate with Event Hubs, steps to generate one here https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-get-connection-string
      connection_string: ""
      # the name of the storage account the state/offsets will be stored and updated
      storage_account: ""
      # the name of the storage account container you would like to store the offset information in.
      storage_account_container: ""
      # the storage account key, this key will be used to authorize access to data in your storage account
      storage_account_key: ""

  platformlogs:
    enabled: false
  #  var:
  #    eventhub: ""
  #    consumer_group: "$Default"
  #    connection_string: ""
  #    storage_account: ""
  #    storage_account_key: ""


  auditlogs:
    enabled: false
 #   var:
 #     eventhub: "insights-logs-auditlogs"
 #     consumer_group: "$Default"
 #     connection_string: ""
 #     storage_account: ""
 #     storage_account_key: ""
  signinlogs:
    enabled: false
 #   var:
 #     eventhub: "insights-logs-signinlogs"
 #     consumer_group: "$Default"
 #     connection_string: ""
 #     storage_account: ""
 #     storage_account_key: ""

#--------------------------------- CEF Module ---------------------------------
- module: cef
  log:
    enabled: false
    var:
      syslog_host: localhost
      syslog_port: 9003

      # Set internal security zones. used to override parsed network.direction
      # based on zone egress and ingress
      #var.internal_zones: [ "Internal" ]

      # Set external security zones. used to override parsed network.direction
      # based on zone egress and ingress
      #var.external_zones: [ "External" ]

#----------------------------- Check Point Module -----------------------------
- module: checkpoint
  firewall:
    enabled: false

    # Set which input to use between syslog (default) or file.
    #var.input: syslog

    # The interface to listen to UDP based syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The UDP port to listen for syslog traffic. Defaults to 9001.
    #var.syslog_port: 9001

    # Set internal security zones. used to override parsed network.direction
    # based on zone egress and ingress
    #var.internal_zones: [ "Internal" ]

    # Set external security zones. used to override parsed network.direction
    # based on zone egress and ingress
    #var.external_zones: [ "External" ]

    # IANA time zone or time offset (e.g. `+0200`) to use when interpreting syslog
    # timestamps without a time zone.
    #var.timezone_offset: UTC

#-------------------------------- Cisco Module --------------------------------
- module: cisco
  asa:
    enabled: false

    # Set which input to use between udp (default), tcp or file.
    #var.input: udp

    # The interface to listen to udp or tcp syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The port to listen for udp or tcp syslog traffic. Defaults to 9001.
    #var.syslog_port: 9001

    # With tcp input, set the optional tls configuration:
    #var.ssl:
    #  enabled: true
    #  certificate: /path/to/cert.pem
    #  key: /path/to/privatekey.pem
    #  key_passphrase: 'password for my key'

    # Set the log level from 1 (alerts only) to 7 (include all messages).
    # Messages with a log level higher than the specified will be dropped.
    # See https://www.cisco.com/c/en/us/td/docs/security/asa/syslog/b_syslog/syslogs-sev-level.html
    #var.log_level: 7

    # Set internal security zones. used to override parsed network.direction
    # based on zone egress and ingress
    #var.internal_zones: [ "Internal" ]

    # Set external security zones. used to override parsed network.direction
    # based on zone egress and ingress
    #var.external_zones: [ "External" ]

    # IANA time zone or time offset (e.g. `+0200`) to use when interpreting syslog
    # timestamps without a time zone.
    #var.timezone_offset: UTC

  ftd:
    enabled: false

    # Set which input to use between udp (default), tcp or file.
    #var.input: udp

    # The interface to listen to tcp or udp syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The UDP port to listen for tcp or udp syslog traffic. Defaults to 9003.
    #var.syslog_port: 9003

    # With tcp input, set the optional tls configuration:
    #var.ssl:
    #  enabled: true
    #  certificate: /path/to/cert.pem
    #  key: /path/to/privatekey.pem
    #  key_passphrase: 'password for my key'

    # Set the log level from 1 (alerts only) to 7 (include all messages).
    # Messages with a log level higher than the specified will be dropped.
    # See https://www.cisco.com/c/en/us/td/docs/security/firepower/Syslogs/b_fptd_syslog_guide/syslogs-sev-level.html
    #var.log_level: 7

    # Set internal security zones. used to override parsed network.direction
    # based on zone egress and ingress
    #var.internal_zones: [ "Internal" ]

    # Set external security zones. used to override parsed network.direction
    # based on zone egress and ingress
    #var.external_zones: [ "External" ]

    # IANA time zone or time offset (e.g. `+0200`) to use when interpreting syslog
    # timestamps without a time zone.
    #var.timezone_offset: UTC

  ios:
    enabled: false

    # Set which input to use between syslog (default) or file.
    #var.input: syslog

    # The interface to listen to syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The port to listen on for syslog traffic. Defaults to 9002.
    #var.syslog_port: 9002

    # Set which protocol to use between udp (default) or tcp.
    #var.syslog_protocol: udp

    # Set custom paths for the log files when using file input. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  umbrella:
    enabled: false

    #var.input: aws-s3
    # AWS SQS queue url
    #var.queue_url: https://sqs.us-east-1.amazonaws.com/ID/CiscoQueue
    # Access ID to authenticate with the S3 input
    #var.access_key_id: 123456
    # Access key to authenticate with the S3 input
    #var.secret_access_key: PASSWORD
    # The duration that the received messages are hidden from ReceiveMessage request
    #var.visibility_timeout: 300s
    # Maximum duration before AWS API request will be interrupted
    #var.api_timeout: 120s

  amp:
    enabled: false

    # Set which input to use between httpjson (default) or file.
    #var.input: httpjson

    # The API URL
    #var.url: https://api.amp.cisco.com/v1/events
    # The client ID used as a username for the API requests.
    #var.client_id:
    # The API key related to the client ID.
    #var.api_key:
    # How far to look back the first time the module is started. Expects an amount of hours.
    #var.first_interval: 24h
    # Overriding the default request timeout, optional.
    #var.request_timeout: 60s

#------------------------------- CoreDNS Module -------------------------------
- module: coredns
  # Fileset for native deployment
  log: 
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#----------------------------- CrowdStrike Module -----------------------------
- module: crowdstrike
  
  falcon:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#----------------------------- Cyberark PAS Module -----------------------------
- module: cyberarkpas
  audit:
    enabled: false

    # Set which input to use between tcp (default), udp, or file.
    #
    # var.input: tcp

    # var.syslog_host: localhost
    # var.syslog_port: 9301

    # With tcp input, set the optional tls configuration:
    #var.ssl:
    #  enabled: true
    #  certificate: /path/to/cert.pem
    #  key: /path/to/privatekey.pem
    #  key_passphrase: 'password for my key'

    # Uncoment to keep the original syslog event under event.original.
    # var.preserve_original_event: true

    # Set paths for the log files when file input is used.
    # var.paths:


#---------------------------- Elasticsearch Module ----------------------------
- module: elasticsearch
  # Server log
  server:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  gc:
    enabled: false
    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  audit:
    enabled: false
    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  slowlog:
    enabled: false
    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  deprecation:
    enabled: false
    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#------------------------------ Envoyproxy Module ------------------------------
- module: envoyproxy
  # Fileset for native deployment
  log: 
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#------------------------------- Fortinet Module -------------------------------
- module: fortinet
  firewall:
    enabled: false

    # Set which input to use between tcp, udp (default) or file.
    #var.input: udp

    # The interface to listen to syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The port to listen for syslog traffic. Defaults to 9004.
    #var.syslog_port: 9004

    # Set internal interfaces. used to override parsed network.direction
    # based on a tagged interface. Both internal and external interfaces must be
    # set to leverage this functionality.
    #var.internal_interfaces: [ "LAN" ]

    # Set external interfaces. used to override parsed network.direction
    # based on a tagged interface. Both internal and external interfaces must be
    # set to leverage this functionality.
    #var.external_interfaces: [ "WAN" ]

    # List of internal networks. Supports IPv4 and IPv6 addresses and ranges in CIDR notation.
    # Also supports the named ranges listed
    # [here](https://www.elastic.co/guide/en/elasticsearch/reference/current/network-direction-processor.html#supported-named-network-ranges).
    # This can't be used in combination with internal_interfaces and external_interfaces.
    #var.internal_networks: [ "private" ]

#--------------------- Google Cloud Platform (GCP) Module ---------------------
- module: gcp
  vpcflow:
    enabled: false

    # Google Cloud project ID.
    var.project_id: my-gcp-project-id

    # Google Pub/Sub topic containing VPC flow logs. Stackdriver must be
    # configured to use this topic as a sink for VPC flow logs.
    var.topic: gcp-vpc-flowlogs

    # Google Pub/Sub subscription for the topic. Filebeat will create this
    # subscription if it does not exist.
    var.subscription_name: filebeat-gcp-vpc-flowlogs-sub

    # Credentials file for the service account with authorization to read from
    # the subscription.
    var.credentials_file: ${path.config}/gcp-service-account-xyz.json

    # Set internal networks. This is used to classify network.direction based
    # off of what networks are considered "internal" either base off of a CIDR
    # block or named network conditions. If this is not specified, then traffic
    # direction is determined by whether it is between source and destination
    # instance information rather than IP.
    #
    # For a full list of network conditions see:
    # https://www.elastic.co/guide/en/beats/filebeat/current/defining-processors.html#condition-network
    #var.internal_networks: [ "private" ]

  firewall:
    enabled: false

    # Google Cloud project ID.
    var.project_id: my-gcp-project-id

    # Google Pub/Sub topic containing firewall logs. Stackdriver must be
    # configured to use this topic as a sink for firewall logs.
    var.topic: gcp-vpc-firewall

    # Google Pub/Sub subscription for the topic. Filebeat will create this
    # subscription if it does not exist.
    var.subscription_name: filebeat-gcp-firewall-sub

    # Credentials file for the service account with authorization to read from
    # the subscription.
    var.credentials_file: ${path.config}/gcp-service-account-xyz.json

    # Set internal networks. This is used to classify network.direction based
    # off of what networks are considered "internal" either base off of a CIDR
    # block or named network conditions. If this is not specified, then traffic
    # is taken from the direction data in the rule_details event payload.
    #
    # For a full list of network conditions see:
    # https://www.elastic.co/guide/en/beats/filebeat/current/defining-processors.html#condition-network
    #var.internal_networks: [ "private" ]

  audit:
    enabled: false

    # Google Cloud project ID.
    var.project_id: my-gcp-project-id

    # Google Pub/Sub topic containing firewall logs. Stackdriver must be
    # configured to use this topic as a sink for firewall logs.
    var.topic: gcp-vpc-audit

    # Google Pub/Sub subscription for the topic. Filebeat will create this
    # subscription if it does not exist.
    var.subscription_name: filebeat-gcp-audit

    # Credentials file for the service account with authorization to read from
    # the subscription.
    var.credentials_file: ${path.config}/gcp-service-account-xyz.json

#--------------------------- Google Workspace Module ---------------------------
- module: google_workspace
  saml:
    enabled: false
    # var.jwt_file: credentials.json
    # var.delegated_account: admin@example.com
    # var.initial_interval: 24h
    # var.http_client_timeout: 60s
    # var.user_key: all
    # var.interval: 2h
  user_accounts:
    enabled: false
    # var.jwt_file: credentials.json
    # var.delegated_account: admin@example.com
    # var.initial_interval: 24h
    # var.http_client_timeout: 60s
    # var.user_key: all
    # var.interval: 2h
  login:
    enabled: false
    # var.jwt_file: credentials.json
    # var.delegated_account: admin@example.com
    # var.initial_interval: 24h
    # var.http_client_timeout: 60s
    # var.user_key: all
    # var.interval: 2h
  admin:
    enabled: false
    # var.jwt_file: credentials.json
    # var.delegated_account: admin@example.com
    # var.initial_interval: 24h
    # var.http_client_timeout: 60s
    # var.user_key: all
    # var.interval: 2h
  drive:
    enabled: false
    # var.jwt_file: credentials.json
    # var.delegated_account: admin@example.com
    # var.initial_interval: 24h
    # var.http_client_timeout: 60s
    # var.user_key: all
    # var.interval: 2h
  groups:
    enabled: false
    # var.jwt_file: credentials.json
    # var.delegated_account: admin@example.com
    # var.initial_interval: 24h
    # var.http_client_timeout: 60s
    # var.user_key: all
    # var.interval: 2h


#------------------------------- HAProxy Module -------------------------------
- module: haproxy
  # All logs
  log:
    enabled: false

    # Set which input to use between syslog (default) or file.
    #var.input:

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#-------------------------------- IBM MQ Module --------------------------------
- module: ibmmq
  # All logs
  errorlog:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#-------------------------------- Icinga Module --------------------------------
#- module: icinga
  # Main logs
  #main:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Debug logs
  #debug:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Startup logs
  #startup:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#--------------------------------- IIS Module ---------------------------------
#- module: iis
  # Access logs
  #access:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Error logs
  #error:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#------------------------------- Iptables Module -------------------------------
- module: iptables
  log:
    enabled: false

    # Set which input to use between syslog (default) or file.
    #var.input:

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#---------------------------- Juniper JUNOS Module ----------------------------
- module: juniper
  srx:
    enabled: false

    # Set which input to use between tcp, udp (default) or file.
    #var.input: udp

    # The interface to listen to syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The port to listen for syslog traffic. Defaults to 9006.
    #var.syslog_port: 9006

#-------------------------------- Kafka Module --------------------------------
- module: kafka
  # All logs
  log:
    enabled: false

    # Set custom paths for Kafka. If left empty,
    # Filebeat will look under /opt.
    #var.kafka_home:

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#-------------------------------- Kibana Module --------------------------------
- module: kibana
  # Server logs
  log:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

  # Audit logs
  audit:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#------------------------------- Logstash Module -------------------------------
#- module: logstash
  # logs
  #log:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    # var.paths:

  # Slow logs
  #slowlog:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#------------------------------ Microsoft Module ------------------------------
- module: microsoft
  # ATP configuration
  defender_atp:
    enabled: false
    # How often the API should be polled
    #var.interval: 5m

    # Oauth Client ID
    #var.oauth2.client.id: ""

    # Oauth Client Secret
    #var.oauth2.client.secret: ""

    # Oauth Token URL, should include the tenant ID
    #var.oauth2.token_url: "https://login.microsoftonline.com/TENANT-ID/oauth2/token"
  m365_defender:
    enabled: false
    # How often the API should be polled
    #var.interval: 5m

    # Oauth Client ID
    #var.oauth2.client.id: ""

    # Oauth Client Secret
    #var.oauth2.client.secret: ""

    # Oauth Token URL, should include the tenant ID
    #var.oauth2.token_url: "https://login.microsoftonline.com/TENANT-ID/oauth2/v2.0/token"

    # Related scopes, default should be included
    #var.oauth2.scopes:
    #  - "https://api.security.microsoft.com/.default"

#--------------------------------- MISP Module ---------------------------------
# Deprecated in 7.14.0: Recommended to migrate to the Threat Intel module.

- module: misp
  threat:
    enabled: false
    # API key to access MISP
    #var.api_key

    # Array object in MISP response
    #var.http_request_body.limit: 1000

    # URL of the MISP REST API
    #var.url

    # You can also pass SSL options. For example:
    #var.ssl.verification_mode: none

#------------------------------- MongoDB Module -------------------------------
#- module: mongodb
  # Logs
  #log:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#-------------------------------- MSSQL Module --------------------------------
- module: mssql
  # Fileset for native deployment
  log:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths: ['C:\Program Files\Microsoft SQL Server\MSSQL.150\MSSQL\LOG\ERRORLOG*']

#-------------------------------- MySQL Module --------------------------------
#- module: mysql
  # Error logs
  #error:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Slow logs
  #slowlog:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#--------------------------- MySQL Enterprise Module ---------------------------
- module: mysqlenterprise
  audit:
    enabled: false

    # Sets the input type. Currently only supports file
    #var.input: file

    # Set paths for the log files when file input is used.
    # Should only be used together with file input
    # var.paths:
    #  - /home/user/mysqlauditlogs/audit.*.log

#--------------------------------- NATS Module ---------------------------------
- module: nats
  # All logs
  log:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#------------------------------- NetFlow Module -------------------------------
- module: netflow
  log:
    enabled: false
    var:
      netflow_host: localhost
      netflow_port: 2055
      # internal_networks specifies which networks are considered internal or private
      # you can specify either a CIDR block or any of the special named ranges listed
      # at: https://www.elastic.co/guide/en/beats/filebeat/current/defining-processors.html#condition-network
      internal_networks:
        - private

#-------------------------------- Nginx Module --------------------------------
#- module: nginx
  # Access logs
  #access:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Error logs
  #error:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

  # Ingress-nginx controller logs. This is disabled by default. It could be used in Kubernetes environments to parse ingress-nginx logs
  #ingress_controller:
  #  enabled: false
  #
  #  # Set custom paths for the log files. If left empty,
  #  # Filebeat will choose the paths depending on your OS.
  #  #var.paths:

#------------------------------ Office 365 Module ------------------------------
- module: o365
  audit:
    enabled: false

    # Set the application_id (also known as client ID):
    var.application_id: "<MyApplicationID>"

    # Configure the tenants to monitor:
    # Use the tenant ID (also known as directory ID) and the domain name.
    # var.tenants:
    #  - id: "tenant_id_1"
    #    name: "mydomain.onmicrosoft.com"
    #  - id: "tenant_id_2"
    #    name: "mycompany.com"
    var.tenants:
     - id: "<MyTenantID>"
       name: "mytenant.onmicrosoft.com"

    # List of content-types to fetch. By default all known content-types
    # are retrieved:
    # var.content_type:
    #  - "Audit.AzureActiveDirectory"
    #  - "Audit.Exchange"
    #  - "Audit.SharePoint"
    #  - "Audit.General"
    #  - "DLP.All"

    # Use the following settings to enable certificate-based authentication:
    # var.certificate: "/path/to/certificate.pem"
    # var.key: "/path/to/private_key.pem"
    # var.key_passphrase: "myPrivateKeyPassword"

    # Client-secret based authentication:
    # Comment the following line if using certificate authentication.
    var.client_secret: "<YourClientSecretHere>"

    # Advanced settings, use with care:
    # var.api:
    #   # Settings for custom endpoints:
    #   authentication_endpoint: "https://login.microsoftonline.us/"
    #   resource: "https://manage.office365.us"
    #
    #   max_retention: 168h
    #   max_requests_per_minute: 2000
    #   poll_interval: 3m

#--------------------------------- Okta Module ---------------------------------
- module: okta
  system:
    enabled: false
    # You must configure the URL with your Okta domain and provide an
    # API token to access the logs API.
    #var.url: https://yourOktaDomain/api/v1/logs
    #var.api_key: 'yourApiTokenHere'

#-------------------------------- Oracle Module --------------------------------
- module: oracle
  database_audit:
    enabled: false

    # Set which input to use between syslog or file (default).
    #var.input: file

    # Set paths for the log files when file input is used.
    # Should only be used together with file input
    #var.paths: ["/home/user/oracleauditlogs/*.aud"]

#------------------------------- Osquery Module -------------------------------
#- module: osquery
  #result:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # If true, all fields created by this module are prefixed with
    # `osquery.result`. Set to false to copy the fields in the root
    # of the document. The default is true.
    #var.use_namespace: true

#-------------------------- Palo Alto Networks Module --------------------------
- module: panw
  panos:
    enabled: false

    # Set which input to use between syslog (default) or file.
    #var.input:

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Set internal security zones. used to determine network.direction
    # default "trust"
    #var.internal_zones:

    # Set external security zones. used to determine network.direction
    # default "untrust"
    #var.external_zones:


#------------------------------- Pensando Module -------------------------------
- module: pensando
# Firewall logs
  dfw:
    enabled: false
    var.syslog_host: 0.0.0.0
    var.syslog_port: 9001

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    # var.paths:

#------------------------------ PostgreSQL Module ------------------------------
#- module: postgresql
  # Logs
  #log:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#------------------------------- RabbitMQ Module -------------------------------
- module: rabbitmq
  # All logs
  log:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths: ["/var/log/rabbitmq/rabbit@localhost.log*"]

#-------------------------------- Redis Module --------------------------------
#- module: redis
  # Main logs
  #log:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths: ["/var/log/redis/redis-server.log*"]

  # Slow logs, retrieved via the Redis API (SLOWLOG)
  #slowlog:
    #enabled: true

    # The Redis hosts to connect to.
    #var.hosts: ["localhost:6379"]

    # Optional, the password to use when connecting to Redis.
    #var.password:

#------------------------------ Salesforce Module ------------------------------
# Configuration file for Salesforce module in Filebeat

# Common Configurations:
# - enabled: Set to true to enable ingestion of Salesforce module fileset
# - initial_interval: Initial interval for log collection. This setting determines the time period for which the logs will be initially collected when the ingestion process starts, i.e. 1d/h/m/s
# - api_version: API version for Salesforce, version should be greater than 46.0

# Authentication Configurations:
# User-Password Authentication:
# - enabled: Set to true to enable user-password authentication
# - client.id: Client ID for user-password authentication
# - client.secret: Client secret for user-password authentication
# - token_url: Token URL for user-password authentication
# - username: Username for user-password authentication
# - password: Password for user-password authentication

# JWT Authentication:
# - enabled: Set to true to enable JWT authentication
# - client.id: Client ID for JWT authentication
# - client.username: Username for JWT authentication
# - client.key_path: Path to client key for JWT authentication
# - url: Audience URL for JWT authentication

# Event Monitoring:
# - real_time: Set to true to enable real-time logging using object type data collection
# - real_time_interval: Interval for real-time logging

# Event Log File:
# - event_log_file: Set to true to enable event log file type data collection
# - elf_interval: Interval for event log file
# - log_file_interval: Interval type for log file collection, either Hourly or Daily

- module: salesforce

  apex:
    enabled: false
    var.initial_interval: 1d
    var.api_version: 56

    var.authentication:
      user_password_flow:
        enabled: true
        client.id: "<YourClientIdHere>"
        client.secret: "<YourClientSecretHere>"
        token_url: "<YourTokenURLHere>"
        username: "<YourUsernameHere>"
        password: "<YourPasswordHere>"
      jwt_bearer_flow:
        enabled: false
        client.id: "<YourClientIdHere>"
        client.username: "<YourClientUsernameHere>"
        client.key_path: "<YourClientKeyPathHere>"
        url: "https://login.salesforce.com"

    var.url: "https://instance_id.my.salesforce.com"

    var.event_log_file: true
    var.elf_interval: 1h
    var.log_file_interval: "Hourly"

  login:
    enabled: false
    var.initial_interval: 1d
    var.api_version: 56

    var.authentication:
      user_password_flow:
        enabled: true
        client.id: "<YourClientIdHere>"
        client.secret: "client-secret"
        token_url: "<YourTokenURLHere>"
        username: "<YourUsernameHere>"
        password: "<YourPasswordHere>"
      jwt_bearer_flow:
        enabled: false
        client.id: "<YourClientIdHere>"
        client.username: "<YourClientUsernameHere>"
        client.key_path: "<YourClientKeyPathHere>"
        url: "https://login.salesforce.com"

    var.url: "https://instance_id.my.salesforce.com"

    var.event_log_file: true
    var.elf_interval: 1h
    var.log_file_interval: "Hourly"

    var.real_time: true
    var.real_time_interval: 5m

  logout:
    enabled: false
    var.initial_interval: 1d
    var.api_version: 56

    var.authentication:
      user_password_flow:
        enabled: true
        client.id: "<YourClientIdHere>"
        client.secret: "client-secret"
        token_url: "<YourTokenURLHere>"
        username: "<YourUsernameHere>"
        password: "<YourPasswordHere>"
      jwt_bearer_flow:
        enabled: false
        client.id: "<YourClientIdHere>"
        client.username: "<YourClientUsernameHere>"
        client.key_path: "<YourClientKeyPathHere>"
        url: "https://login.salesforce.com"

    var.url: "https://instance_id.my.salesforce.com"

    var.event_log_file: true
    var.elf_interval: 1h
    var.log_file_interval: "Hourly"

    var.real_time: true
    var.real_time_interval: 5m

  setupaudittrail:
    enabled: false
    var.initial_interval: 1d
    var.api_version: 56

    var.authentication:
      user_password_flow:
        enabled: true
        client.id: "<YourClientIdHere>"
        client.secret: "client-secret"
        token_url: "<YourTokenURLHere>"
        username: "<YourUsernameHere>"
        password: "<YourPasswordHere>"
      jwt_bearer_flow:
        enabled: false
        client.id: "<YourClientIdHere>"
        client.username: "<YourClientUsernameHere>"
        client.key_path: "<YourClientKeyPathHere>"
        url: "https://login.salesforce.com"

    var.url: "https://instance_id.my.salesforce.com"

    var.real_time: true
    var.real_time_interval: 5m
#----------------------------- Google Santa Module -----------------------------
- module: santa
  log:
    enabled: false
    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the the default path.
    #var.paths:

#--------------------------------- Snyk Module ---------------------------------
- module: snyk
  audit:
    enabled: false
    # Set which input to use between httpjson (default) or file.
    #var.input: httpjson
    #
    # What audit type to collect, can be either "group" or "organization".
    #var.audit_type: organization
    #
    # The ID related to the audit_type. If audit type is group, then this value should be
    # the group ID and if it is organization it should be the organization ID to collect from.
    #var.audit_id: 1235432-asdfdf-2341234-asdgjhg
    # How often the API should be polled, defaults to 1 hour.
    #var.interval: 1h
    # How far to look back the first time the module starts up. (Only works with full days, 24 hours, 48 hours etc).
    #var.first_interval: 24h
    # The API token that is created for a specific user, found in the Snyk management dashboard.
    #var.api_token:
    # Event filtering.
    # All configuration items below is OPTIONAL and the default options will be overwritten
    # for each entry that is not commented out.
    # Will return only logs for this specific project.
    #var.project_id: ""
    # User public ID. Will fetch only audit logs originated from this user's actions.
    #var.user_id: ""
    # Will return only logs for this specific event.
    #var.event: ""
    # User email address. Will fetch only audit logs originated from this user's actions.
    #var.email_address: ""

  vulnerabilities:
    enabled: false
    # Set which input to use between httpjson (default) or file.
    #var.input: httpjson
    # How often the API should be polled. Data from the Snyk API is automatically updated
    # once per day, so the default interval is 24 hours.
    #var.interval: 24h
    # How far to look back the first time the module starts up. (Only works with full days, 24 hours, 48 hours etc).
    #var.first_interval: 24h
    # The API token that is created for a specific user, found in the Snyk management dashboard.
    #var.api_token:
    # The list of org IDs to filter the results by.
    # One organization ID per line, starting with a - sign
    #var.orgs:
    #  - 12354-asdfdf-123543-asdsdfg
    #  - 76554-jhggfd-654342-hgrfasd
    # Event filtering.
    # All configuration items below is OPTIONAL and the default options will be overwritten
    # for each entry that is not commented out.
    # The severity levels of issues to filter the results by.
    #var.included_severity:
    #  - critical
    #  - high
    #  - medium
    #  - low
    #
    # The exploit maturity levels of issues to filter the results by.
    #var.exploit_maturity:
    #  - mature
    #  - proof-of-concept
    #  - no-known-exploit
    #  - no-data
    #
    # The type of issues to filter the results by.
    #var.types:
    #  - vuln
    #  - license
    #  - configuration
    #
    # The type of languages to filter the results by.
    #var.languages:
    #  - javascript
    #  - ruby
    #  - java
    #  - scala
    #  - python
    #  - golang
    #  - php
    #  - dotnet
    #  - swift-objective-c
    #  - elixir
    #  - docker
    #  - terraform
    #  - kubernetes
    #  - helm
    #  - cloudformation
    #
    # Search term to filter issue name by, or an exact CVE or CWE.
    #var.identifier:
    #  - ""
    #
    # If set to true, only include issues which are ignored, if set to false, only include issues which are not ignored.
    #var.ignored: false
    #var.patched: false
    #var.fixable: false
    #var.is_fixed: false
    #var.is_patchable: false
    #var.is_pinnable: false
    #
    # The priority score ranging between 0-1000
    #var.min_priority_score: 0
    #var.max_priority_score: 1000

#-------------------------------- Sophos Module --------------------------------
- module: sophos
  xg:
    enabled: false

    # Set which input to use between tcp, udp (default) or file.
    #var.input: udp

    # The interface to listen to syslog traffic. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.syslog_host: localhost

    # The port to listen for syslog traffic. Defaults to 9004.
    #var.syslog_port: 9005

    # firewall default hostname
    #var.default_host_name: firewall.localgroup.local

    # known firewalls
    #var.known_devices:
      #- serial_number: "1234567890123457"
      #  hostname: "a.host.local"
      #- serial_number: "1234234590678557"
      #  hostname: "b.host.local"


#------------------------------- Suricata Module -------------------------------
- module: suricata
  # All logs
  eve:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#----------------------------- Threat Intel Module -----------------------------
- module: threatintel
  abuseurl:
    enabled: false

    # Input used for ingesting threat intel data.
    var.input: httpjson

    # The URL used for Threat Intel API calls.
    var.url: https://urlhaus-api.abuse.ch/v1/urls/recent/

    # The interval to poll the API for updates.
    var.interval: 10m

  abusemalware:
    enabled: false

    # Input used for ingesting threat intel data.
    var.input: httpjson

    # The URL used for Threat Intel API calls.
    var.url: https://urlhaus-api.abuse.ch/v1/payloads/recent/

    # The interval to poll the API for updates.
    var.interval: 10m

  malwarebazaar:
    enabled: false

    # Input used for ingesting threat intel data.
    var.input: httpjson

    # The URL used for Threat Intel API calls.
    var.url: https://mb-api.abuse.ch/api/v1/

    # The interval to poll the API for updates.
    var.interval: 10m

  misp:
    enabled: false

    # Input used for ingesting threat intel data, defaults to JSON.
    var.input: httpjson

    # The URL of the MISP instance, should end with "/events/restSearch".
    var.url: https://SERVER/events/restSearch

    # The authentication token used to contact the MISP API. Found when looking at user account in the MISP UI.
    var.api_token: API_KEY

    # Configures the type of SSL verification done, if MISP is running on self signed certificates
    # then the certificate would either need to be trusted, or verification_mode set to none.
    #var.ssl.verification_mode: none

    # Optional filters that can be applied to the API for filtering out results. This should support the majority of fields in a MISP context.
    # For examples please reference the filebeat module documentation.
    #var.filters:
    #  - threat_level: [4, 5]
    #  - to_ids: true

    # How far back to look once the beat starts up for the first time, the value has to be in hours. Each request afterwards will filter on any event newer
    # than the last event that was already ingested.
    var.first_interval: 300h

    # The interval to poll the API for updates.
    var.interval: 5m

  otx:
    enabled: false

    # Input used for ingesting threat intel data
    var.input: httpjson

    # The URL used for OTX Threat Intel API calls.
    var.url: https://otx.alienvault.com/api/v1/indicators/export

    # The authentication token used to contact the OTX API, can be found on the OTX UI.
    var.api_token: API_KEY

    # Optional filters that can be applied to retrieve only specific indicators.
    #var.types: "domain,IPv4,hostname,url,FileHash-SHA256"

    # The timeout of the HTTP client connecting to the OTX API
    #var.http_client_timeout: 120s

    # How many hours to look back for each request, should be close to the configured interval. Deduplication of events is handled by the module.
    var.lookback_range: 1h

    # How far back to look once the beat starts up for the first time, the value has to be in hours.
    var.first_interval: 400h

    # The interval to poll the API for updates
    var.interval: 5m

  anomali:
    enabled: false

    # Input used for ingesting threat intel data
    var.input: httpjson

    # The URL used for Threat Intel API calls. Limo has multiple different possibilities for URL's depending
    # on the type of threat intel source that is needed.
    var.url: https://limo.anomali.com/api/v1/taxii2/feeds/collections/41/objects

    # The Username used by anomali Limo, defaults to guest.
    #var.username: guest

    # The password used by anomali Limo, defaults to guest.
    #var.password: guest

    # How far back to look once the beat starts up for the first time, the value has to be in hours.
    var.first_interval: 400h

    # The interval to poll the API for updates
    var.interval: 5m

  anomalithreatstream:
    enabled: false

    # Input used for ingesting threat intel data
    var.input: http_endpoint

    # Address to bind to in order to receive HTTP requests
    # from the Integrator SDK. Use 0.0.0.0 to bind to all
    # existing interfaces.
    var.listen_address: localhost

    # Port to use to receive HTTP requests from the
    # Integrator SDK.
    var.listen_port: 8080

    # Secret key to authenticate requests from the SDK.
    var.secret: "<Add your secret here>"

    # Uncomment the following and set the absolute paths
    # to the server SSL certificate and private key to
    # enable HTTPS secure connections.
    #
    # var.ssl_certificate: path/to/server_ssl_cert.pem
    # var.ssl_key: path/to/ssl_key.pem

  threatq:
    enabled: false

    # Input used for ingesting threat intel data
    var.input: httpjson

    # The URL used for ThreatQ ThreatLibrary API calls.
    # Remember to put a slash at the end of the host URL
    var.host: https://www.threatq.com/

    # Oauth 2.0 Access Token URL
    var.token_url: https://www.threatq.com/api/token

    # Oauth 2.0 Client ID
    var.client_id: "INSERT_CLIENT_ID"

    # Oauth 2.0 Client Secret
    var.client_secret: "INSERT_CLIENT_SECRET"

    # The interval to poll the API for updates
    var.interval: 1m

    # The ID for the ThreatQ smart data collection
    var.data_collection_id: "INSERT_THREATQ_DATA_COLLECTION_ID"

    # The URL of the proxy if used
    #var.proxy_url: http://proxy:8000

    # Customize the HTTP timeout configured for the API requests
    #var.http_client_timeout: 30s

#------------------------------- Traefik Module -------------------------------
#- module: traefik
  # Access logs
  #access:
    #enabled: true

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

    # Input configuration (advanced). Any input configuration option
    # can be added under this section.
    #input:

#------------------------------ Zeek (Bro) Module ------------------------------
- module: zeek
  capture_loss:
    enabled: false
  connection:
    enabled: false
  dce_rpc:
    enabled: false
  dhcp:
    enabled: false
  dnp3:
    enabled: false
  dns:
    enabled: false
  dpd:
    enabled: false
  files:
    enabled: false
  ftp:
    enabled: false
  http:
    enabled: false
  intel:
    enabled: false
  irc:
    enabled: false
  kerberos:
    enabled: false
  modbus:
    enabled: false
  mysql:
    enabled: false
  notice:
    enabled: false
  ntp:
    enabled: false
  ntlm:
    enabled: false
  ocsp:
    enabled: false
  pe:
    enabled: false
  radius:
    enabled: false
  rdp:
    enabled: false
  rfb:
    enabled: false
  signature:
    enabled: false
  sip:
    enabled: false
  smb_cmd:
    enabled: false
  smb_files:
    enabled: false
  smb_mapping:
    enabled: false
  smtp:
    enabled: false
  snmp:
    enabled: false
  socks:
    enabled: false
  ssh:
    enabled: false
  ssl:
    enabled: false
  stats:
    enabled: false
  syslog:
    enabled: false
  traceroute:
    enabled: false
  tunnel:
    enabled: false
  weird:
    enabled: false
  x509:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#------------------------------ ZooKeeper Module ------------------------------
- module: zookeeper
  # All logs
  audit:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:
  # All logs
  log:
    enabled: false

    # Set custom paths for the log files. If left empty,
    # Filebeat will choose the paths depending on your OS.
    #var.paths:

#--------------------------------- Zoom Module ---------------------------------
- module: zoom
  webhook:
    enabled: false

    # The type of input to use
    #var.input: http_endpoint

    # The interface to listen for incoming HTTP requests. Defaults to
    # localhost. Set to 0.0.0.0 to bind to all available interfaces.
    #var.listen_address: localhost

    # The port to bind to
    #var.listen_port: 80

    # The header Zoom uses to send its secret token, defaults to "Authorization"
    #secret.header: Authorization

    # The custom secret token value created when configuring the Zoom webhook
    #secret.value: my-custom-value

    # Enable the CRC webhook validation
    #crc.enabled: false

    # The secret token value provided by Zoom for CRC validation
    #crc.secret: ZOOMSECRETTOKEN



#=========================== Filebeat inputs =============================

# List of inputs to fetch data.
filebeat.inputs:
# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.

# Type of the files. Based on this the way the file is read is decided.
# The different types cannot be mixed in one input
#
# Possible options are:
# * filestream: Reads every line of the log file
# * log: Reads every line of the log file (deprecated)
# * stdin: Reads the standard in

#------------------------------ Log input --------------------------------
- type: log

  # Change to true to enable this input configuration.
  enabled: false

  # Paths that should be crawled and fetched. Glob based paths.
  # To fetch all ".log" files from a specific level of subdirectories
  # /var/log/*/*.log can be used.
  # For each file found under this path, a harvester is started.
  # Make sure no file is defined twice as this can lead to unexpected behaviour.
  paths:
    - /var/log/*.log
    #- c:\programdata\elasticsearch\logs\*

  # Configure the file encoding for reading files with international characters
  # following the W3C recommendation for HTML5 (http://www.w3.org/TR/encoding).
  # Some sample encodings:
  #   plain, utf-8, utf-16be-bom, utf-16be, utf-16le, big5, gb18030, gbk,
  #    hz-gb-2312, euc-kr, euc-jp, iso-2022-jp, shift-jis, ...
  #encoding: plain


  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list. The include_lines is called before
  # exclude_lines. By default, no lines are dropped.
  #exclude_lines: ['^DBG']

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list. The include_lines is called before
  # exclude_lines. By default, all the lines are exported.
  #include_lines: ['^ERR', '^WARN']

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #exclude_files: ['.gz$']

  # Method to determine if two files are the same or not. By default
  # the Beat considers two files the same if their inode and device id are the same.
  #file_identity.native: ~

  # Optional additional fields. These fields can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  #  level: debug
  #  review: 1

  # Set to true to store the additional fields as top-level fields instead
  # of under the "fields" sub-dictionary. In case of name conflicts with the
  # fields added by Filebeat itself, the custom fields overwrite the default
  # fields.
  #fields_under_root: false

  # Set to true to publish fields with null values in events.
  #keep_null: false

  # By default, all events contain `host.name`. This option can be set to true
  # to disable the addition of this field to all events. The default value is
  # false.
  #publisher_pipeline.disable_host: false

  # Ignore files that were modified more than the defined timespan in the past.
  # ignore_older is disabled by default, so no files are ignored by setting it to 0.
  # Time strings like 2h (2 hours), 5m (5 minutes) can be used.
  #ignore_older: 0

  # How often the input checks for new files in the paths that are specified
  # for harvesting. Specify 1s to scan the directory as frequently as possible
  # without causing Filebeat to scan too frequently. Default: 10s.
  #scan_frequency: 10s

  # Defines the buffer size every harvester uses when fetching the file
  #harvester_buffer_size: 16384

  # Maximum number of bytes a single log event can have
  # All bytes after max_bytes are discarded and not sent. The default is 10MB.
  # This is especially useful for multiline log messages which can get large.
  #max_bytes: 10485760

  # Characters that separate the lines. Valid values: auto, line_feed, vertical_tab, form_feed,
  # carriage_return, carriage_return_line_feed, next_line, line_separator, paragraph_separator,
  # null_terminator
  #line_terminator: auto

  ### Recursive glob configuration

  # Expand "**" patterns into regular glob patterns.
  #recursive_glob.enabled: true

  ### JSON configuration

  # Decode JSON options. Enable this if your logs are structured in JSON.
  # JSON key on which to apply the line filtering and multiline settings. This key
  # must be top level and its value must be string, otherwise it is ignored. If
  # no text key is defined, the line filtering and multiline features cannot be used.
  #json.message_key:

  # By default, the decoded JSON is placed under a "json" key in the output document.
  # If you enable this setting, the keys are copied top level in the output document.
  #json.keys_under_root: false

  # If keys_under_root and this setting are enabled, then the values from the decoded
  # JSON object overwrites the fields that Filebeat normally adds (type, source, offset, etc.)
  # in case of conflicts.
  #json.overwrite_keys: false

  # If this setting is enabled, then keys in the decoded JSON object will be recursively
  # de-dotted, and expanded into a hierarchical object structure.
  # For example, `{"a.b.c": 123}` would be expanded into `{"a":{"b":{"c":123}}}`.
  #json.expand_keys: false

  # If this setting is enabled, Filebeat adds an "error.message" and "error.key: json" key in case of JSON
  # unmarshaling errors or when a text key is defined in the configuration but cannot
  # be used.
  #json.add_error_key: false

  ### Multiline options

  # Multiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
  #multiline.pattern: ^\[

  # Defines if the pattern set under the pattern should be negated or not. Default is false.
  #multiline.negate: false

  # Match can be set to "after" or "before". It is used to define if lines should be appended to a pattern
  # that was (not) matched before or after or as long as a pattern is not matched based on negate.
  # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
  #multiline.match: after

  # The maximum number of lines that are combined into one event.
  # In case there are more the max_lines the additional lines are discarded.
  # Default is 500
  #multiline.max_lines: 500

  # After the defined timeout, a multiline event is sent even if no new pattern was found to start a new event
  # Default is 5s.
  #multiline.timeout: 5s

  # To aggregate constant number of lines into a single event use the count mode of multiline.
  #multiline.type: count

  # The number of lines to aggregate into a single event.
  #multiline.count_lines: 3

  # Do not add new line characters when concatenating lines.
  #multiline.skip_newline: false

  # Setting tail_files to true means filebeat starts reading new files at the end
  # instead of the beginning. If this is used in combination with log rotation
  # this can mean that the first entries of a new file are skipped.
  #tail_files: false

  # The ingest pipeline ID associated with this input. If this is set, it
  # overwrites the pipeline option from the Elasticsearch output.
  #pipeline:

  # If symlinks is enabled, symlinks are opened and harvested. The harvester is opening the
  # original for harvesting but will report the symlink name as the source.
  #symlinks: false

  # Backoff values define how aggressively filebeat crawls new files for updates
  # The default values can be used in most cases. Backoff defines how long it has to wait
  # to check a file again after EOF is reached. Default is 1s which means the file
  # is checked every second if new lines were added. This leads to a near real-time crawling.
  # Every time a new line appears, backoff is reset to the initial value.
  #backoff: 1s

  # Max backoff defines what the maximum backoff time is. After having backed off multiple times
  # from checking the files, the waiting time will never exceed max_backoff independent of the
  # backoff factor. Having it set to 10s means in the worst case a new line can be added to a log
  # file after having backed off multiple times, it takes a maximum of 10s to read the new line
  #max_backoff: 10s

  # The backoff factor defines how fast the algorithm backs off. The bigger the backoff factor,
  # the faster the max_backoff value is reached. If this value is set to 1, no backoff will happen.
  # The backoff value will be multiplied each time with the backoff_factor until max_backoff is reached
  #backoff_factor: 2

  # Max number of harvesters that are started in parallel.
  # Default is 0 which means unlimited
  #harvester_limit: 0

  ### Harvester closing options

  # Close inactive closes the file handler after the predefined period.
  # The period starts when the last line of the file was, not the file ModTime.
  # Time strings like 2h (2 hours), and 5m (5 minutes) can be used.
  #close_inactive: 5m

  # Close renamed closes a file handler when the file is renamed or rotated.
  # Note: Potential data loss. Make sure to read and understand the docs for this option.
  #close_renamed: false

  # When enabling this option, a file handler is closed immediately in case a file can't be found
  # any more. In case the file shows up again later, harvesting will continue at the last known position
  # after scan_frequency.
  #close_removed: true

  # Closes the file handler as soon as the harvesters reach the end of the file.
  # By default this option is disabled.
  # Note: Potential data loss. Make sure to read and understand the docs for this option.
  #close_eof: false

  ### State options

  # Files for the modification data are older than clean_inactive the state from the registry is removed
  # By default this is disabled.
  #clean_inactive: 0

  # Removes the state for files which cannot be found on disk anymore immediately
  #clean_removed: true

  # Close timeout closes the harvester after the predefined time.
  # This is independent if the harvester did finish reading the file or not.
  # By default this option is disabled.
  # Note: Potential data loss. Make sure to read and understand the docs for this option.
  #close_timeout: 0

  # Defines if inputs are enabled
  #enabled: true

#--------------------------- Filestream input ----------------------------
- type: filestream

  # Unique ID among all inputs, an ID is required.
  id: my-filestream-id

  # Change to true to enable this input configuration.
  enabled: false

  # Paths that should be crawled and fetched. Glob based paths.
  # To fetch all ".log" files from a specific level of subdirectories
  # /var/log/*/*.log can be used.
  # For each file found under this path, a harvester is started.
  # Make sure not file is defined twice as this can lead to unexpected behaviour.
  paths:
    - /var/log/*.log
    #- c:\programdata\elasticsearch\logs\*

  # Configure the file encoding for reading files with international characters
  # following the W3C recommendation for HTML5 (http://www.w3.org/TR/encoding).
  # Some sample encodings:
  #   plain, utf-8, utf-16be-bom, utf-16be, utf-16le, big5, gb18030, gbk,
  #    hz-gb-2312, euc-kr, euc-jp, iso-2022-jp, shift-jis, ...
  #encoding: plain


  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list. The include_lines is called before
  # exclude_lines. By default, no lines are dropped.
  # Line filtering happens after the parsers pipeline. If you would like to filter lines
  # before parsers, use include_message parser.
  #exclude_lines: ['^DBG']

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list. The include_lines is called before
  # exclude_lines. By default, all the lines are exported.
  # Line filtering happens after the parsers pipeline. If you would like to filter lines
  # before parsers, use include_message parser.
  #include_lines: ['^ERR', '^WARN']

  ### Prospector options

  # How often the input checks for new files in the paths that are specified
  # for harvesting. Specify 1s to scan the directory as frequently as possible
  # without causing Filebeat to scan too frequently. Default: 10s.
  #prospector.scanner.check_interval: 10s

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #prospector.scanner.exclude_files: ['.gz$']

  # Include files. A list of regular expressions to match. Filebeat keeps only the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #prospector.scanner.include_files: ['/var/log/.*']

  # Expand "**" patterns into regular glob patterns.
  #prospector.scanner.recursive_glob: true

  # If symlinks is enabled, symlinks are opened and harvested. The harvester is opening the
  # original for harvesting but will report the symlink name as the source.
  #prospector.scanner.symlinks: false

  # If enabled, instead of relying on the device ID and inode values when comparing files,
  # compare hashes of the given byte ranges in files. A file becomes an ingest target
  # when its size grows larger than offset+length (see below). Until then it's ignored.
  #prospector.scanner.fingerprint.enabled: true

  # If fingerprint mode is enabled, sets the offset from the beginning of the file
  # for the byte range used for computing the fingerprint value.
  #prospector.scanner.fingerprint.offset: 0

  # If fingerprint mode is enabled, sets the length of the byte range used for
  # computing the fingerprint value. Cannot be less than 64 bytes.
  #prospector.scanner.fingerprint.length: 1024

  ### Parsers configuration

  #### JSON configuration

  #parsers:
    #- ndjson:
      # Decode JSON options. Enable this if your logs are structured in JSON.
      # JSON key on which to apply the line filtering and multiline settings. This key
      # must be top level and its value must be a string, otherwise it is ignored. If
      # no text key is defined, the line filtering and multiline features cannot be used.
      #message_key:

      # By default, the decoded JSON is placed under a "json" key in the output document.
      # If you enable this setting, the keys are copied to the top level of the output document.
      #keys_under_root: false

      # If keys_under_root and this setting are enabled, then the values from the decoded
      # JSON object overwrite the fields that Filebeat normally adds (type, source, offset, etc.)
      # in case of conflicts.
      #overwrite_keys: false

      # If this setting is enabled, then keys in the decoded JSON object will be recursively
      # de-dotted, and expanded into a hierarchical object structure.
      # For example, `{"a.b.c": 123}` would be expanded into `{"a":{"b":{"c":123}}}`.
      #expand_keys: false

      # If this setting is enabled, Filebeat adds an "error.message" and "error.key: json" key in case of JSON
      # unmarshaling errors or when a text key is defined in the configuration but cannot
      # be used.
      #add_error_key: false

  #### Filtering messages

  # You can filter messsages in the parsers pipeline. Use this method if you would like to
  # include or exclude lines before they are aggregated into multiline or the JSON contents
  # are parsed.

  #parsers:
    #- include_message.patterns:
      #- ["WARN", "ERR"]

  #### Multiline options

  # Multiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  #parsers:
    #- multiline:
      #type: pattern
      # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
      #pattern: ^\[

      # Defines if the pattern set under the pattern setting should be negated or not. Default is false.
      #negate: false

      # Match can be set to "after" or "before". It is used to define if lines should be appended to a pattern
      # that was (not) matched before or after or as long as a pattern is not matched based on negate.
      # Note: After is the equivalent to previous and before is the equivalent to next in Logstash
      #match: after

      # The maximum number of lines that are combined into one event.
      # In case there are more than max_lines the additional lines are discarded.
      # Default is 500
      #max_lines: 500

      # After the defined timeout, a multiline event is sent even if no new pattern was found to start a new event
      # Default is 5s.
      #timeout: 5s

      # Do not add new line character when concatenating lines.
      #skip_newline: false

  # To aggregate constant number of lines into a single event use the count mode of multiline.

  #parsers:
    #- multiline:
      #type: count

      # The number of lines to aggregate into a single event.
      #count_lines: 3

      # The maximum number of lines that are combined into one event.
      # In case there are more than max_lines the additional lines are discarded.
      # Default is 500
      #max_lines: 500

      # After the defined timeout, a multiline event is sent even if no new pattern was found to start a new event
      # Default is 5s.
      #timeout: 5s

      # Do not add new line characters when concatenating lines.
      #skip_newline: false

  #### Parsing container events

  # You can parse container events with different formats from all streams.

  #parsers:
    #- container:
       # Source of container events. Available options: all, stdin, stderr.
       #stream: all

       # Format of the container events. Available options: auto, cri, docker, json-file
       #format: auto

  ### Log rotation

  # When an external tool rotates the input files with copytruncate strategy
  # use this section to help the input find the rotated files.
  #rotation.external.strategy.copytruncate:
  # Regex that matches the rotated files.
  #  suffix_regex: \.\d$
  # If the rotated filename suffix is a datetime, set it here.
  #  dateformat: -20060102

  ### State options

  # Files for the modification data is older than clean_inactive the state from the registry is removed
  # By default this is disabled.
  #clean_inactive: -1

  # Removes the state for files which cannot be found on disk anymore immediately
  #clean_removed: true

  # Method to determine if two files are the same or not. By default
  # a fingerprint is generated using the first 1024 bytes of the file,
  # if the fingerprints match, then the files are considered equal.
  #file_identity.fingerprint: ~

  # Optional additional fields. These fields can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  #  level: debug
  #  review: 1

  # Set to true to publish fields with null values in events.
  #keep_null: false

  # By default, all events contain `host.name`. This option can be set to true
  # to disable the addition of this field to all events. The default value is
  # false.
  #publisher_pipeline.disable_host: false

  # Ignore files that were modified more than the defined timespan in the past.
  # ignore_older is disabled by default, so no files are ignored by setting it to 0.
  # Time strings like 2h (2 hours) and 5m (5 minutes) can be used.
  #ignore_older: 0

  # Ignore files that have not been updated since the selected event.
  # ignore_inactive is disabled by default, so no files are ignored by setting it to "".
  # Available options: since_first_start, since_last_start.
  #ignore_inactive: ""

  # When `take_over.enabled` is set to `true` this `filestream` input
  # will take over files from `log` or `filestream` (need to set `from_ids`) inputs.
  # Taking over states of active `log` or `filestream` inputs is not
  # supported and will lead to inconsistent data ingestion (data
  # duplication or data loss).
  # This functionality is still in beta.
  #take_over:
  #  enabled: true
  #  If `from_ids` is set, then the files are taken over
  #  from `filestream` inputs that were assigned these IDs.
  #  Taking over from `log` inputs is disabled when `from_ids` is set.
  #  from_ids: ["foo", "bar"]

  # Defines the buffer size every harvester uses when fetching the file
  #harvester_buffer_size: 16384

  # Maximum number of bytes a single log event can have
  # All bytes after max_bytes are discarded and not sent. The default is 10MB.
  # This is especially useful for multiline log messages which can get large.
  #message_max_bytes: 10485760

  # Characters that separate the lines. Valid values: auto, line_feed, vertical_tab, form_feed,
  # carriage_return, carriage_return_line_feed, next_line, line_separator, paragraph_separator,
  # null_terminator
  #line_terminator: auto

  # The ingest pipeline ID associated with this input. If this is set, it
  # overwrites the pipeline option from the Elasticsearch output.
  #pipeline:

  # Backoff values define how aggressively filebeat crawls new files for updates
  # The default values can be used in most cases. Backoff defines how long it has to wait
  # to check a file again after EOF is reached. Default is 1s which means the file
  # is checked every second if new lines were added. This leads to a near real-time crawling.
  # Every time a new line appears, backoff is reset to the initial value.
  #backoff.init: 1s

  # Max backoff defines what the maximum backoff time is. After having backed off multiple times
  # from checking the files, the waiting time will never exceed max_backoff independent of the
  # backoff factor. Having it set to 10s means in the worst case a new line can be added to a log
  # file after having backed off multiple times, it takes a maximum of 10s to read the new line
  #backoff.max: 10s

  ### Harvester closing options

  # Close inactive closes the file handler after the predefined period.
  # The period starts when the last line of the file was, not the file ModTime.
  # Time strings like 2h (2 hours) and 5m (5 minutes) can be used.
  #close.on_state_change.inactive: 5m

  # Close renamed closes a file handler when the file is renamed or rotated.
  # Note: Potential data loss. Make sure to read and understand the docs for this option.
  #close.on_state_change.renamed: false

  # When enabling this option, a file handler is closed immediately in case a file can't be found
  # any more. In case the file shows up again later, harvesting will continue at the last known position
  # after scan_frequency.
  # By default, it's `true` on Windows and `false` on the rest of the platforms.
  #close.on_state_change.removed: false

  # Closes the file handler as soon as the harvesters reaches the end of the file.
  # By default this option is disabled.
  # Note: Potential data loss. Make sure to read and understand the docs for this option.
  #close.reader.on_eof: false

  # Close timeout closes the harvester after the predefined time.
  # This is independent if the harvester did finish reading the file or not.
  # By default this option is disabled.
  # Note: Potential data loss. Make sure to read and understand the docs for this option.
  #close.reader.after_interval: 0

#----------------------------- Stdin input -------------------------------
# Configuration to use stdin input
#- type: stdin

#------------------------- Redis slowlog input ---------------------------
# Experimental: Config options for the redis slow log input
#- type: redis
  #enabled: false

  # List of hosts to pool to retrieve the slow log information.
  #hosts: ["localhost:6379"]

  # How often the input checks for redis slow log.
  #scan_frequency: 10s

  # Timeout after which time the input should return an error
  #timeout: 1s

  # Network type to be used for redis connection. Default: tcp
  #network: tcp

  # Max number of concurrent connections. Default: 10
  #maxconn: 10

  # Redis AUTH password. Empty by default.
  #password: foobared

#------------------------------ Udp input --------------------------------
# Experimental: Config options for the udp input
#- type: udp
  #enabled: false

  # Maximum size of the message received over UDP
  #max_message_size: 10KiB

  # Size of the UDP read buffer in bytes
  #read_buffer: 0


#------------------------------ TCP input --------------------------------
# Experimental: Config options for the TCP input
#- type: tcp
  #enabled: false

  # The host and port to receive the new event
  #host: "localhost:9000"

  # Character used to split new message
  #line_delimiter: "\n"

  # Maximum size in bytes of the message received over TCP
  #max_message_size: 20MiB

  # Max number of concurrent connections, or 0 for no limit. Default: 0
  #max_connections: 0

  # The number of seconds of inactivity before a remote connection is closed.
  #timeout: 300s

  # Use SSL settings for TCP.
  #ssl.enabled: true

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for client verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL server authentication.
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Server Certificate Key,
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections.
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites.
  #ssl.curve_types: []

  # Configure what types of client authentication are supported. Valid options
  # are `none`, `optional`, and `required`. When `certificate_authorities` is set it will
  # default to `required` otherwise it will be set to `none`.
  #ssl.client_authentication: "required"


#------------------------------ Kafka input --------------------------------
# Accept events from topics in a Kafka cluster.
#- type: kafka
  #enabled: false

  # A list of hosts/ports for the initial Kafka brokers.
  #hosts:
    #- kafka-broker-1:9092
    #- kafka-broker-2:9092

  # A list of topics to read from.
  #topics: ["my-topic", "important-logs"]

  # The Kafka consumer group id to use when connecting.
  #group_id: "filebeat"

  # An optional Kafka client id to attach to Kafka requests.
  #client_id: "my-client"

  # The version of the Kafka protocol to use.
  #version: 1.0

  # Set to "newest" to start reading from the most recent message when connecting to a
  # new topic, otherwise the input will begin reading at the oldest remaining event.
  #initial_offset: oldest

  # How long to wait before trying to reconnect to the kafka cluster after a fatal error.
  #connect_backoff: 30s

  # How long to wait before retrying a failed read.
  #consume_backoff: 2s

  # How long to wait for the minimum number of input bytes while reading.
  #max_wait_time: 250ms

  # The Kafka isolation level, "read_uncommitted" or "read_committed".
  #isolation_level: read_uncommitted

  # Some Kafka deployments such as Microsoft Azure can return multiple events packed into a
  # single data field. Set this field to specify where events should be unpacked from.
  #expand_event_list_from_field: "records"

  # The minimum number of bytes to wait for.
  #fetch.min: 1

  # The default number of bytes to read per request.
  #fetch.default: 1MB

  # The maximum number of bytes to read per request (0 for no limit).
  #fetch.max: 0

  # Consumer rebalance strategy, "range" or "roundrobin"
  #rebalance.strategy: "range"

  # How long to wait for an attempted rebalance.
  #rebalance.timeout: 60s

  # How many times to retry if rebalancing fails.
  #rebalance.max_retries: 4

  # How long to wait after an unsuccessful rebalance attempt.
  #rebalance.retry_backoff: 2s

  # SASL authentication mechanism used. Can be one of PLAIN, SCRAM-SHA-256 or SCRAM-SHA-512.
  # Defaults to PLAIN when `username` and `password` are configured.
  #sasl.mechanism: ''

  # Parsers can be used with the Kafka input. The available parsers are "ndjson" and
  # "multiline". See the filestream input configuration for more details.
  #parsers:
  #- ndjson:
  #   ...
  #- multiline:
  #   ...


#------------------------------ Syslog input --------------------------------
# Accept RFC3164 formatted syslog event via UDP.
#- type: syslog
  #enabled: false
  #format: rfc3164
  #protocol.udp:
    # The host and port to receive the new event
    #host: "localhost:9000"

    # Maximum size of the message received over UDP
    #max_message_size: 10KiB

# Accept RFC5424 formatted syslog event via TCP.
#- type: syslog
  #enabled: false
  #format: rfc5424

  #protocol.tcp:
    # The host and port to receive the new event
    #host: "localhost:9000"

    # Character used to split new message
    #line_delimiter: "\n"

    # Maximum size in bytes of the message received over TCP
    #max_message_size: 20MiB

    # The number of seconds of inactivity before a remote connection is closed.
    #timeout: 300s

    # Use SSL settings for TCP.
    #ssl.enabled: true

    # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
    # 1.2 are enabled.
    #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

    # SSL configuration. By default is off.
    # List of root certificates for client verifications
    #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

    # Certificate for SSL server authentication.
    #ssl.certificate: "/etc/pki/client/cert.pem"

    # Server Certificate Key,
    #ssl.key: "/etc/pki/client/cert.key"

    # Optional passphrase for decrypting the Certificate Key.
    #ssl.key_passphrase: ''

    # Configure cipher suites to be used for SSL connections.
    #ssl.cipher_suites: []

    # Configure curve types for ECDHE based cipher suites.
    #ssl.curve_types: []

    # Configure what types of client authentication are supported. Valid options
    # are `none`, `optional`, and `required`. When `certificate_authorities` is set it will
    # default to `required` otherwise it will be set to `none`.
    #ssl.client_authentication: "required"

#------------------------------ Container input --------------------------------
#- type: container
  #enabled: false

  # Paths for container logs that should be crawled and fetched.
  #paths:
  #  -/var/lib/docker/containers/*/*.log

  # Configure stream to filter to a specific stream: stdout, stderr or all (default)
  #stream: all

#------------------------------ Journald input --------------------------------
# Journald input is experimental.
#- type: journald
  #enabled: true

  # Unique ID among all inputs, if the ID changes, all entries
  # will be re-ingested
  id: my-journald-id

  # Specify paths to read from custom journal files.
  # Leave it unset to read the system's journal
  # Glob based paths.
  #paths:
    #- /var/log/custom.journal

  # The position to start reading from the journal, valid options are:
  #  - head: Starts reading at the beginning of the journal.
  #  - tail: Starts reading at the end of the journal.
  #    This means that no events will be sent until a new message is written.
  #  - since: Use also the `since` option to determine when to start reading from.
  #seek: head

  # A time offset from the current time to start reading from.
  # To use since, seek option must be set to since.
  #since: -24h

  # Collect events from the service and messages about the service,
  # including coredumps.
  #units:
    #- docker.service

  # List of syslog identifiers
  #syslog_identifiers: ["audit"]

  # The list of transports (_TRANSPORT field of journald entries)
  #transports: ["audit"]

  # Filter logs by facilities, they must be specified using their numeric code.
  #facilities:
    #- 1
    #- 2

  # You may wish to have separate inputs for each service. You can use
  # include_matches.match to define a list of filters, each event needs
  # to match all filters defined.
  #include_matches.match:
    #- _SYSTEMD_UNIT=foo.service

  # To create a disjunction (logical OR) use the `+` character between
  # the filters
  #include_matches:
    #match:
      #- "systemd.transport=kernel"
      #- "+"
      #- "journald.process.name=systemd"

  # Uses the original hostname of the entry instead of the one
  # from the host running jounrald
  #save_remote_hostname: false

  # Parsers are also supported, the possible parsers are:
  # container, include_message, multiline, ndjson, syslog.
  # Here is an example of the multiline
  # parser.
  #parsers:
  #- multiline:
    #type: count
    #count_lines: 3

#------------------------------ NetFlow input --------------------------------
# Experimental: Config options for the Netflow/IPFIX collector over UDP input
#- type: netflow
  #enabled: false

  # Address where the NetFlow Collector will bind
  #host: ":2055"

  # Maximum size of the message received over UDP
  #max_message_size: 10KiB

  # List of enabled protocols.
  # Valid values are 'v1', 'v5', 'v6', 'v7', 'v8', 'v9' and 'ipfix'
  #protocols: [ v5, v9, ipfix ]

  # Expiration timeout
  # This is the time before an idle session or unused template is expired.
  # Only applicable to v9 and ipfix protocols. A value of zero disables expiration.
  #expiration_timeout: 30m

  # Share Templates
  # This option allows v9 and ipfix templates to be shared within a session without
  # reference to the origin of the template.
  #
  # Setting this to true is not recommended as it can result in the wrong template
  # being applied under certain conditions, but it may be required for some systems.
  #share_templates: false

  # Queue size limits the number of netflow packets that are queued awaiting
  # processing.
  #queue_size: 8192

  # Custom field definitions for NetFlow V9 / IPFIX.
  # List of files with YAML fields definition.
  #custom_definitions:
  #- path/to/ipfix.yaml
  #- path/to/netflow.yaml

#---------------------------- Google Cloud Pub/Sub Input -----------------------
# Input for reading messages from a Google Cloud Pub/Sub topic subscription.
- type: gcp-pubsub
  enabled: false

  # Google Cloud project ID. Required.
  project_id: my-gcp-project-id

  # Google Cloud Pub/Sub topic name. Required.
  topic: my-gcp-pubsub-topic-name

  # Google Cloud Pub/Sub topic subscription name. Required.
  subscription.name: my-gcp-pubsub-subscription-name

  # Create subscription if it does not exist.
  #subscription.create: true

  # Number of goroutines to create to read from the subscription.
  #subscription.num_goroutines: 1

  # Maximum number of unprocessed messages to allow at any time.
  # This must be at least queue.mem.flush.min_events to prevent input blockage.
  #subscription.max_outstanding_messages: 1600

  # Path to a JSON file containing the credentials and key used to subscribe.
  credentials_file: ${path.config}/my-pubsub-subscriber-credentials.json

#------------------------------ AWS S3 input --------------------------------
# Beta: Config options for AWS S3 input
#- type: aws-s3
  #enabled: false

  # AWS Credentials
  # If access_key_id and secret_access_key are configured, then use them to make api calls.
  # If not, aws-s3 input will load default AWS config or load with given profile name.
  #access_key_id: '${AWS_ACCESS_KEY_ID:""}'
  #secret_access_key: '${AWS_SECRET_ACCESS_KEY:""}'
  #session_token: '${AWS_SESSION_TOKEN:"”}'
  #credential_profile_name: test-aws-s3-input

  # SQS queue URL to receive messages from (required).
  #queue_url: "https://sqs.us-east-1.amazonaws.com/1234/test-aws-s3-logs-queue"

  # Number of workers on S3 bucket or SQS queue
  #number_of_workers: 5

  # Maximum duration of an AWS API call (excluding S3 GetObject calls).
  #api_timeout: 120s

  # Duration that received SQS messages are hidden from subsequent
  # requests after being retrieved by a ReceiveMessage request.
  #visibility_timeout: 300s

  # List of S3 object metadata keys to include in events.
  #include_s3_metadata: []

  # The max number of times an SQS message should be received (retried) before deleting it.
  #sqs.max_receive_count: 5

  # Maximum duration for which the SQS ReceiveMessage call waits for a message
  # to arrive in the queue before returning.
  #sqs.wait_time: 20s

  # Bucket ARN used for polling AWS S3 buckets
  #bucket_arn: arn:aws:s3:::test-s3-bucket

  # Access Point ARN used for polling AWS S3 buckets
  #access_point_arn: arn:aws:s3:us-east-1:123456789:accesspoint/my-accesspoint

  # Bucket Name used for polling non-AWS S3 buckets
  #non_aws_bucket_name: test-s3-bucket

  # Configures the AWS S3 API to use path style instead of virtual host style (default)
  #path_style: false

  # Overrides the `cloud.provider` field for non-AWS S3 buckets. See docs for auto recognized providers.
  #provider: minio

  # Configures backing up processed files to another (or the same) bucket
  #backup_to_bucket_arn: 'arn:aws:s3:::mybucket'
  #non_aws_backup_to_bucket_name: 'mybucket'

  # Sets a prefix to prepend to object keys when backing up
  #backup_to_bucket_prefix: 'backup/'

  # Controls deletion of objects after backing them up
  #delete_after_backup: false

  # Ignore bucket entries older than the given timespan.
  # Timespan is calculated from current time to processing object's last modified timestamp.
  # This is disabled by default(value 0) and can be configured to a time duration like "48h" or "2h30m".
  #ignore_older: 0

  # Accept bucket entries with last modified timestamp newer than the given timestamp.
  # Accepts a timestamp in YYYY-MM-DDTHH:MM:SSZ format and default is empty.
  # For example, "2024-11-20T20:00:00Z" (UTC) or "2024-11-20T22:30:00+02:30" (with zone offset).
  #start_timestamp:

#------------------------------ AWS CloudWatch input --------------------------------
# Beta: Config options for AWS CloudWatch input
#- type: aws-cloudwatch
  #enabled: false

  # AWS Credentials
  # If access_key_id and secret_access_key are configured, then use them to make api calls.
  # If not, aws-cloudwatch input will load default AWS config or load with given profile name.
  #access_key_id: '${AWS_ACCESS_KEY_ID:""}'
  #secret_access_key: '${AWS_SECRET_ACCESS_KEY:""}'
  #session_token: '${AWS_SESSION_TOKEN:"”}'
  #credential_profile_name: test-aws-s3-input

  # ARN of the log group to collect logs from
  # This ARN could refer to a log group from a linked source account
  # Note: This property precedes over `log_group_name` & `log_group_name_prefix`
  #log_group_arn: "arn:aws:logs:us-east-1:428152502467:log-group:test:*"

  # Name of the log group to collect logs from.
  # Note: region_name is required when log_group_name is given.
  #log_group_name: test

  # The prefix for a group of log group names.
  # You can include linked source accounts by using the property `include_linked_accounts_for_prefix_mode`.
  # Note: `region_name` is required when `log_group_name_prefix` is given.
  # `log_group_name` and `log_group_name_prefix` cannot be given at the same time.
  #log_group_name_prefix: /aws/

  # State whether to include linked source accounts when obtaining log groups matching the prefix provided through `log_group_name_prefix`
  # This property works together with `log_group_name_prefix` and default value (if unset) is false
  #include_linked_accounts_for_prefix_mode: true

  # Region that the specified log group or log group prefix belongs to.
  #region_name: us-east-1

  # A list of strings of log streams names that Filebeat collect log events from.
  #log_streams:
  # - log_stream_name

  # A string to filter the results to include only log events from log streams
  # that have names starting with this prefix.
  #log_stream_prefix: test

  # `start_position` allows user to specify if this input should read log files
  # from the `beginning` or from the `end`.
  # `beginning`: reads from the beginning of the log group (default).
  # `end`: read only new messages from current time minus `scan_frequency` going forward.
  #start_position: beginning

  # This config parameter sets how often Filebeat checks for new log events from the
  # specified log group. Default `scan_frequency` is 1 minute, which means Filebeat
  # will sleep for 1 minute before querying for new logs again.
  #scan_frequency: 1m

  # The maximum duration of AWS API can take. If it exceeds the timeout, AWS API
  # will be interrupted.
  # The default AWS API timeout for a message is 120 seconds.
  # The minimum is 0 seconds.
  #api_timeout: 120s

  # This is used to sleep between AWS `FilterLogEvents` API calls inside the same
  # collection period.
  #api_sleep: 200ms

  # This is used to shift collection start time and end time back in order to
  # collect logs when there is a delay in CloudWatch.
  #latency: 1m

#------------------------------ ETW input --------------------------------
# Beta: Config options for ETW (Event Trace for Windows) input (Only available for Windows)
#- type: etw
  #enabled: false
  #id: etw-dnsserver

  # Path to an .etl file to read from.
  #file: "C:\Windows\System32\Winevt\Logs\Logfile.etl"

  # GUID of an ETW provider.
  # Run 'logman query providers' to list the available providers.
  #provider.guid: {EB79061A-A566-4698-9119-3ED2807060E7}

  # Name of an ETW provider.
  # Run 'logman query providers' to list the available providers.
  #provider.name: Microsoft-Windows-DNSServer

  # Tag to identify created sessions.
  # If missing, its default value is the provider ID prefixed by 'Elastic-'.
  #session_name: DNSServer-Analytical-Trace

  # Filter collected events with a level value that is less than or equal to this level.
  # Allowed values are critical, error, warning, informational, and verbose.
  #trace_level: verbose

  # 8-byte bitmask that enables the filtering of events from specific provider subcomponents.
  # The provider will write a particular event if the event's keyword bits match any of the bits
  # in this bitmask.
  # Run 'logman query providers "<provider.name>"' to list available keywords.
  #match_any_keyword: 0x8000000000000000

  # 8-byte bitmask that enables the filtering of events from
  # specific provider subcomponents. The provider will write a particular
  # event if the event's keyword bits match all of the bits in this bitmask.
  # Run 'logman query providers "<provider.name>"' to list available keywords.
  #match_all_keyword: 0

  # An existing session to read from.
  # Run 'logman query -ets' to list existing sessions.
  #session: UAL_Usermode_Provider

# =========================== Filebeat autodiscover ============================

# Autodiscover allows you to detect changes in the system and spawn new modules
# or inputs as they happen.

#filebeat.autodiscover:
  # List of enabled autodiscover providers
#  providers:
#    - type: docker
#      templates:
#        - condition:
#            equals.docker.container.image: busybox
#          config:
#            - type: container
#              paths:
#                - /var/log/containers/*.log

#Example: for kubernetes container logs autodiscovery
#  filebeat.autodiscover:
#    providers:
#      - type: kubernetes
#        node: ${NODE_NAME}
#        hints.enabled: true
#        # By default requests to kubeadm config map are made in order to enrich cluster name by requesting /api/v1/namespaces/kube-system/configmaps/kubeadm-config API endpoint.
#        use_kubeadm: true
#        hints.default_config:
#          type: filestream
#          id: kubernetes-container-logs-${data.kubernetes.pod.name}-${data.kubernetes.container.id}
#          paths:
#          - /var/log/containers/*-${data.kubernetes.container.id}.log
#          parsers:
#          - container: ~
#          prospector:
#            scanner:
#              fingerprint.enabled: true
#              symlinks: true
#          file_identity.fingerprint: ~

#By default requests to kubeadm config map are made in order to enrich cluster name by requesting /api/v1/namespaces/kube-system/configmaps/kubeadm-config API endpoint.
#  use_kubeadm: true

# ========================== Filebeat global options ===========================

# Registry data path. If a relative path is used, it is considered relative to the
# data path.
#filebeat.registry.path: ${path.data}/registry

# The permissions mask to apply on registry data and meta files. The default
# value is 0600.  Must be a valid Unix-style file permissions mask expressed in
# octal notation.  This option is not supported on Windows.
#filebeat.registry.file_permissions: 0600

# The timeout value that controls when registry entries are written to the disk
# (flushed). When an unwritten update exceeds this value, it triggers a write
# to disk. When flush is set to 0s, the registry is written to disk after each
# batch of events has been published successfully. The default value is 1s.
#filebeat.registry.flush: 1s

# The interval which to run the registry clean up
#filebeat.registry.cleanup_interval: 5m

# Starting with Filebeat 7.0, the registry uses a new directory format to store
# Filebeat state. After you upgrade, Filebeat will automatically migrate a 6.x
# registry file to use the new directory format. If you changed
# filebeat.registry.path while upgrading, set filebeat.registry.migrate_file to
# point to the old registry file.
#filebeat.registry.migrate_file: ${path.data}/registry

# By default Ingest pipelines are not updated if a pipeline with the same ID
# already exists. If this option is enabled Filebeat overwrites pipelines
# every time a new Elasticsearch connection is established.
#filebeat.overwrite_pipelines: false

# How long filebeat waits on shutdown for the publisher to finish.
# Default is 0, not waiting.
#filebeat.shutdown_timeout: 0

# Enable filebeat config reloading
#filebeat.config:
  #inputs:
    #enabled: false
    #path: inputs.d/*.yml
    #reload.enabled: true
    #reload.period: 10s
  #modules:
    #enabled: true
    #path: modules.d/*.yml
    #reload.enabled: true
    #reload.period: 10s


# ================================== General ===================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this option is not defined, the hostname is used.
#name:

# The tags of the shipper are included in their field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output. Fields can be scalar values, arrays, dictionaries, or any nested
# combination of these.
#fields:
#  env: staging

# If this option is set to true, the custom fields are stored as top-level
# fields in the output document instead of being grouped under a field
# sub-dictionary. Default is false.
#fields_under_root: false

# Configure the precision of all timestamps in Filebeat.
# Available options: millisecond, microsecond, nanosecond
#timestamp.precision: millisecond

# Internal queue configuration for buffering events to be published.
# Queue settings may be overridden by performance presets in the
# Elasticsearch output. To configure them manually use "preset: custom".
#queue:
  # Queue type by name (default 'mem')
  # The memory queue will present all available events (up to the outputs
  # bulk_max_size) to the output, the moment the output is ready to serve
  # another batch of events.
  #mem:
    # Max number of events the queue can buffer.
    #events: 3200

    # Hints the minimum number of events stored in the queue,
    # before providing a batch of events to the outputs.
    # The default value is set to 2048.
    # A value of 0 ensures events are immediately available
    # to be sent to the outputs.
    #flush.min_events: 1600

    # Maximum duration after which events are available to the outputs,
    # if the number of events stored in the queue is < `flush.min_events`.
    #flush.timeout: 10s

  # The disk queue stores incoming events on disk until the output is
  # ready for them. This allows a higher event limit than the memory-only
  # queue and lets pending events persist through a restart.
  #disk:
    # The directory path to store the queue's data.
    #path: "${path.data}/diskqueue"

    # The maximum space the queue should occupy on disk. Depending on
    # input settings, events that exceed this limit are delayed or discarded.
    #max_size: 10GB

    # The maximum size of a single queue data file. Data in the queue is
    # stored in smaller segments that are deleted after all their events
    # have been processed.
    #segment_size: 1GB

    # The number of events to read from disk to memory while waiting for
    # the output to request them.
    #read_ahead: 512

    # The number of events to accept from inputs while waiting for them
    # to be written to disk. If event data arrives faster than it
    # can be written to disk, this setting prevents it from overflowing
    # main memory.
    #write_ahead: 2048

    # The duration to wait before retrying when the queue encounters a disk
    # write error.
    #retry_interval: 1s

    # The maximum length of time to wait before retrying on a disk write
    # error. If the queue encounters repeated errors, it will double the
    # length of its retry interval each time, up to this maximum.
    #max_retry_interval: 30s

# Sets the maximum number of CPUs that can be executed simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:

# ================================= Processors =================================

# Processors are used to reduce the number of fields in the exported event or to
# enhance the event with external metadata. This section defines a list of
# processors that are applied one by one and the first one receives the initial
# event:
#
#   event -> filter1 -> event1 -> filter2 ->event2 ...
#
# The supported processors are drop_fields, drop_event, include_fields,
# decode_json_fields, and add_cloud_metadata.
#
# For example, you can use the following processors to keep the fields that
# contain CPU load percentages, but remove the fields that contain CPU ticks
# values:
#
#processors:
#  - include_fields:
#      fields: ["cpu"]
#  - drop_fields:
#      fields: ["cpu.user", "cpu.system"]
#
# The following example drops the events that have the HTTP response code 200:
#
#processors:
#  - drop_event:
#      when:
#        equals:
#          http.code: 200
#
# The following example renames the field a to b:
#
#processors:
#  - rename:
#      fields:
#        - from: "a"
#          to: "b"
#
# The following example tokenizes the string into fields:
#
#processors:
#  - dissect:
#      tokenizer: "%{key1} - %{key2}"
#      field: "message"
#      target_prefix: "dissect"
#
# The following example enriches each event with metadata from the cloud
# provider about the host machine. It works on EC2, GCE, DigitalOcean,
# Tencent Cloud, and Alibaba Cloud.
#
#processors:
#  - add_cloud_metadata: ~
#
# The following example enriches each event with the machine's local time zone
# offset from UTC.
#
#processors:
#  - add_locale:
#      format: offset
#
# The following example enriches each event with docker metadata, it matches
# given fields to an existing container id and adds info from that container:
#
#processors:
#  - add_docker_metadata:
#      host: "unix:///var/run/docker.sock"
#      match_fields: ["system.process.cgroup.id"]
#      match_pids: ["process.pid", "process.parent.pid"]
#      match_source: true
#      match_source_index: 4
#      match_short_id: false
#      cleanup_timeout: 60
#      labels.dedot: false
#      # To connect to Docker over TLS you must specify a client and CA certificate.
#      #ssl:
#      #  certificate_authority: "/etc/pki/root/ca.pem"
#      #  certificate:           "/etc/pki/client/cert.pem"
#      #  key:                   "/etc/pki/client/cert.key"
#
# The following example enriches each event with docker metadata, it matches
# container id from log path available in `source` field (by default it expects
# it to be /var/lib/docker/containers/*/*.log).
#
#processors:
#  - add_docker_metadata: ~
#
# The following example enriches each event with host metadata.
#
#processors:
#  - add_host_metadata: ~
#
# The following example enriches each event with process metadata using
# process IDs included in the event.
#
#processors:
#  - add_process_metadata:
#      match_pids: ["system.process.ppid"]
#      target: system.process.parent
#
# The following example decodes fields containing JSON strings
# and replaces the strings with valid JSON objects.
#
#processors:
#  - decode_json_fields:
#      fields: ["field1", "field2", ...]
#      process_array: false
#      max_depth: 1
#      target: ""
#      overwrite_keys: false
#
#processors:
#  - decompress_gzip_field:
#      from: "field1"
#      to: "field2"
#      ignore_missing: false
#      fail_on_error: true
#
# The following example copies the value of the message to message_copied
#
#processors:
#  - copy_fields:
#      fields:
#        - from: message
#          to: message_copied
#      fail_on_error: true
#      ignore_missing: false
#
# The following example truncates the value of the message to 1024 bytes
#
#processors:
#  - truncate_fields:
#      fields:
#        - message
#      max_bytes: 1024
#      fail_on_error: false
#      ignore_missing: true
#
# The following example preserves the raw message under event.original
#
#processors:
#  - copy_fields:
#      fields:
#        - from: message
#          to: event.original
#      fail_on_error: false
#      ignore_missing: true
#  - truncate_fields:
#      fields:
#        - event.original
#      max_bytes: 1024
#      fail_on_error: false
#      ignore_missing: true
#
# The following example URL-decodes the value of field1 to field2
#
#processors:
#  - urldecode:
#      fields:
#        - from: "field1"
#          to: "field2"
#      ignore_missing: false
#      fail_on_error: true

# =============================== Elastic Cloud ================================

# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

# ================================== Outputs ===================================

# Configure what output to use when sending the data collected by the beat.

# ---------------------------- Elasticsearch Output ----------------------------
output.elasticsearch:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  hosts: ["localhost:9200"]

  # Performance presets configure other output fields to recommended values
  # based on a performance priority.
  # Options are "balanced", "throughput", "scale", "latency" and "custom".
  # Default if unspecified: "custom"
  preset: balanced

  # Set gzip compression level. Set to 0 to disable compression.
  # This field may conflict with performance presets. To set it
  # manually use "preset: custom".
  # The default is 1.
  #compression_level: 1

  # Configure escaping HTML symbols in strings.
  #escape_html: false

  # Protocol - either `http` (default) or `https`.
  #protocol: "https"

  # Authentication credentials - either API key or username/password.
  #api_key: "id:api_key"
  #username: "elastic"
  #password: "changeme"

  # Dictionary of HTTP parameters to pass within the URL with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Number of workers per Elasticsearch host.
  # This field may conflict with performance presets. To set it
  # manually use "preset: custom".
  #worker: 1

  # If set to true and multiple hosts are configured, the output plugin load
  # balances published events onto all Elasticsearch hosts. If set to false,
  # the output plugin sends all events to only one host (determined at random)
  # and will switch to another host if the currently selected one becomes
  # unreachable. The default value is true.
  #loadbalance: true

  # Optional data stream or index name. The default is "filebeat-%{[agent.version]}".
  # In case you modify this pattern you must update setup.template.name and setup.template.pattern accordingly.
  #index: "filebeat-%{[agent.version]}"

  # Optional ingest pipeline. By default, no pipeline will be used.
  #pipeline: ""

  # Optional HTTP path
  #path: "/elasticsearch"

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server URL
  #proxy_url: http://proxy:3128

  # Whether to disable proxy settings for outgoing connections. If true, this
  # takes precedence over both the proxy_url field and any environment settings
  # (HTTP_PROXY, HTTPS_PROXY). The default is false.
  #proxy_disable: false

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # This field may conflict with performance presets. To set it
  # manually use "preset: custom".
  # The default is 1600.
  #bulk_max_size: 1600

  # The number of seconds to wait before trying to reconnect to Elasticsearch
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Elasticsearch after a network error. The default is 60s.
  #backoff.max: 60s

  # The maximum amount of time an idle connection will remain idle
  # before closing itself.  Zero means use the default of 60s. The
  # format is a Go language duration (example 60s is 60 seconds).
  # This field may conflict with performance presets. To set it
  # manually use "preset: custom".
  # The default is 3s.
  # idle_connection_timeout: 3s

  # Configure HTTP request timeout before failing a request to Elasticsearch.
  #timeout: 90

  # Prevents filebeat from connecting to older Elasticsearch versions when set to `false`
  #allow_older_versions: true

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Controls the verification of certificates. Valid values are:
  # * full, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate.
  # * strict, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate. If the Subject Alternative
  # Name is empty, it returns an error.
  # * certificate, which verifies that the provided certificate is signed by a
  # trusted authority (CA), but does not perform any hostname verification.
  #  * none, which performs no verification of the server's certificate. This
  # mode disables many of the security benefits of SSL/TLS and should only be used
  # after very careful consideration. It is primarily intended as a temporary
  # diagnostic mechanism when attempting to resolve TLS errors; its use in
  # production environments is strongly discouraged.
  # The default value is full.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256: ""

  # A root CA HEX encoded fingerprint. During the SSL handshake if the
  # fingerprint matches the root CA certificate, it will be added to
  # the provided list of root CAs (`certificate_authorities`), if the
  # list is empty or not defined, the matching certificate will be the
  # only one in the list. Then the normal SSL validation happens.
  #ssl.ca_trusted_fingerprint: ""


  # Enables restarting filebeat if any file listed by `key`,
  # `certificate`, or `certificate_authorities` is modified.
  # This feature IS NOT supported on Windows.
  #ssl.restart_on_cert_change.enabled: false

  # Period to scan for changes on CA certificate files
  #ssl.restart_on_cert_change.period: 1m

  # Enable Kerberos support. Kerberos is automatically enabled if any Kerberos setting is set.
  #kerberos.enabled: true

  # Authentication type to use with Kerberos. Available options: keytab, password.
  #kerberos.auth_type: password

  # Path to the keytab file. It is used when auth_type is set to keytab.
  #kerberos.keytab: /etc/elastic.keytab

  # Path to the Kerberos configuration.
  #kerberos.config_path: /etc/krb5.conf

  # Name of the Kerberos user.
  #kerberos.username: elastic

  # Password of the Kerberos user. It is used when auth_type is set to password.
  #kerberos.password: changeme

  # Kerberos realm.
  #kerberos.realm: ELASTIC


# ------------------------------ Logstash Output -------------------------------
#output.logstash:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The Logstash hosts
  #hosts: ["localhost:5044"]

  # Number of workers per Logstash host.
  #worker: 1

  # Set gzip compression level.
  #compression_level: 3

  # Configure escaping HTML symbols in strings.
  #escape_html: false

  # Optional maximum time to live for a connection to Logstash, after which the
  # connection will be re-established.  A value of `0s` (the default) will
  # disable this feature.
  #
  # Not yet supported for async connections (i.e. with the "pipelining" option set)
  #ttl: 30s

  # Optionally load-balance events between Logstash hosts. Default is false.
  #loadbalance: false

  # Number of batches to be sent asynchronously to Logstash while processing
  # new batches.
  #pipelining: 2

  # If enabled only a subset of events in a batch of events is transferred per
  # transaction.  The number of events to be sent increases up to `bulk_max_size`
  # if no error is encountered.
  #slow_start: false

  # The number of seconds to wait before trying to reconnect to Logstash
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Logstash after a network error. The default is 60s.
  #backoff.max: 60s

  # Optional index name. The default index name is set to filebeat
  # in all lowercase.
  #index: 'filebeat'

  # SOCKS5 proxy server URL
  #proxy_url: socks5://user:password@socks5-server:2233

  # Resolve names locally when using a proxy server. Defaults to false.
  #proxy_use_local_resolver: false

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Controls the verification of certificates. Valid values are:
  # * full, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate.
  # * strict, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate. If the Subject Alternative
  # Name is empty, it returns an error.
  # * certificate, which verifies that the provided certificate is signed by a
  # trusted authority (CA), but does not perform any hostname verification.
  #  * none, which performs no verification of the server's certificate. This
  # mode disables many of the security benefits of SSL/TLS and should only be used
  # after very careful consideration. It is primarily intended as a temporary
  # diagnostic mechanism when attempting to resolve TLS errors; its use in
  # production environments is strongly discouraged.
  # The default value is full.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256: ""

  # A root CA HEX encoded fingerprint. During the SSL handshake if the
  # fingerprint matches the root CA certificate, it will be added to
  # the provided list of root CAs (`certificate_authorities`), if the
  # list is empty or not defined, the matching certificate will be the
  # only one in the list. Then the normal SSL validation happens.
  #ssl.ca_trusted_fingerprint: ""

  # Enables restarting filebeat if any file listed by `key`,
  # `certificate`, or `certificate_authorities` is modified.
  # This feature IS NOT supported on Windows.
  #ssl.restart_on_cert_change.enabled: false

  # Period to scan for changes on CA certificate files
  #ssl.restart_on_cert_change.period: 1m

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat and Winlogbeat, ignore the max_retries setting
  # and retry until all events are published.  Set max_retries to a value less
  # than 0 to retry until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Logstash request. The
  # default is 2048.
  #bulk_max_size: 2048

  # The number of seconds to wait for responses from the Logstash server before
  # timing out. The default is 30s.
  #timeout: 30s

# -------------------------------- Kafka Output --------------------------------
#output.kafka:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The list of Kafka broker addresses from which to fetch the cluster metadata.
  # The cluster metadata contain the actual Kafka brokers events are published
  # to.
  #hosts: ["localhost:9092"]

  # The Kafka topic used for produced events. The setting can be a format string
  # using any event field. To set the topic from document type use `%{[type]}`.
  #topic: beats

  # The Kafka event key setting. Use format string to create a unique event key.
  # By default no event key will be generated.
  #key: ''

  # The Kafka event partitioning strategy. Default hashing strategy is `hash`
  # using the `output.kafka.key` setting or randomly distributes events if
  # `output.kafka.key` is not configured.
  #partition.hash:
    # If enabled, events will only be published to partitions with reachable
    # leaders. Default is false.
    #reachable_only: false

    # Configure alternative event field names used to compute the hash value.
    # If empty `output.kafka.key` setting will be used.
    # Default value is empty list.
    #hash: []

  # Authentication details. Password is required if username is set.
  #username: ''
  #password: ''

  # SASL authentication mechanism used. Can be one of PLAIN, SCRAM-SHA-256 or SCRAM-SHA-512.
  # Defaults to PLAIN when `username` and `password` are configured.
  #sasl.mechanism: ''

  # Kafka version Filebeat is assumed to run against. Defaults to the "1.0.0".
  #version: '1.0.0'

  # Configure JSON encoding
  #codec.json:
    # Pretty-print JSON event
    #pretty: false

    # Configure escaping HTML symbols in strings.
    #escape_html: false

  # Metadata update configuration. Metadata contains leader information
  # used to decide which broker to use when publishing.
  #metadata:
    # Max metadata request retry attempts when cluster is in middle of leader
    # election. Defaults to 3 retries.
    #retry.max: 3

    # Wait time between retries during leader elections. Default is 250ms.
    #retry.backoff: 250ms

    # Refresh metadata interval. Defaults to every 10 minutes.
    #refresh_frequency: 10m

    # Strategy for fetching the topics metadata from the broker. Default is false.
    #full: false

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published.  Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The number of seconds to wait before trying to republish to Kafka
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to republish. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful publish, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to republish to
  # Kafka after a network error. The default is 60s.
  #backoff.max: 60s

  # The maximum number of events to bulk in a single Kafka request. The default
  # is 2048.
  #bulk_max_size: 2048

  # Duration to wait before sending bulk Kafka request. 0 is no delay. The default
  # is 0.
  #bulk_flush_frequency: 0s

  # The number of seconds to wait for responses from the Kafka brokers before
  # timing out. The default is 30s.
  #timeout: 30s

  # The maximum duration a broker will wait for number of required ACKs. The
  # default is 10s.
  #broker_timeout: 10s

  # The number of messages buffered for each Kafka broker. The default is 256.
  #channel_buffer_size: 256

  # The keep-alive period for an active network connection. If 0s, keep-alives
  # are disabled. The default is 0 seconds.
  #keep_alive: 0

  # Sets the output compression codec. Must be one of none, snappy and gzip. The
  # default is gzip.
  #compression: gzip

  # Set the compression level. Currently only gzip provides a compression level
  # between 0 and 9. The default value is chosen by the compression algorithm.
  #compression_level: 4

  # The maximum permitted size of JSON-encoded messages. Bigger messages will be
  # dropped. The default value is 1000000 (bytes). This value should be equal to
  # or less than the broker's message.max.bytes.
  #max_message_bytes: 1000000

  # The ACK reliability level required from broker. 0=no response, 1=wait for
  # local commit, -1=wait for all replicas to commit. The default is 1.  Note:
  # If set to 0, no ACKs are returned by Kafka. Messages might be lost silently
  # on error.
  #required_acks: 1

  # The configurable ClientID used for logging, debugging, and auditing
  # purposes.  The default is "beats".
  #client_id: beats

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Controls the verification of certificates. Valid values are:
  # * full, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate.
  # * strict, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate. If the Subject Alternative
  # Name is empty, it returns an error.
  # * certificate, which verifies that the provided certificate is signed by a
  # trusted authority (CA), but does not perform any hostname verification.
  #  * none, which performs no verification of the server's certificate. This
  # mode disables many of the security benefits of SSL/TLS and should only be used
  # after very careful consideration. It is primarily intended as a temporary
  # diagnostic mechanism when attempting to resolve TLS errors; its use in
  # production environments is strongly discouraged.
  # The default value is full.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256: ""

  # A root CA HEX encoded fingerprint. During the SSL handshake if the
  # fingerprint matches the root CA certificate, it will be added to
  # the provided list of root CAs (`certificate_authorities`), if the
  # list is empty or not defined, the matching certificate will be the
  # only one in the list. Then the normal SSL validation happens.
  #ssl.ca_trusted_fingerprint: ""

  # Enables restarting filebeat if any file listed by `key`,
  # `certificate`, or `certificate_authorities` is modified.
  # This feature IS NOT supported on Windows.
  #ssl.restart_on_cert_change.enabled: false

  # Period to scan for changes on CA certificate files
  #ssl.restart_on_cert_change.period: 1m

  # Enable Kerberos support. Kerberos is automatically enabled if any Kerberos setting is set.
  #kerberos.enabled: true

  # Authentication type to use with Kerberos. Available options: keytab, password.
  #kerberos.auth_type: password

  # Path to the keytab file. It is used when auth_type is set to keytab.
  #kerberos.keytab: /etc/security/keytabs/kafka.keytab

  # Path to the Kerberos configuration.
  #kerberos.config_path: /etc/krb5.conf

  # The service name. Service principal name is contructed from
  # service_name/hostname@realm.
  #kerberos.service_name: kafka

  # Name of the Kerberos user.
  #kerberos.username: elastic

  # Password of the Kerberos user. It is used when auth_type is set to password.
  #kerberos.password: changeme

  # Kerberos realm.
  #kerberos.realm: ELASTIC

  # Enables Kerberos FAST authentication. This may
  # conflict with certain Active Directory configurations.
  #kerberos.enable_krb5_fast: false

# -------------------------------- Redis Output --------------------------------
#output.redis:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Configure JSON encoding
  #codec.json:
    # Pretty print json event
    #pretty: false

    # Configure escaping HTML symbols in strings.
    #escape_html: false

  # The list of Redis servers to connect to. If load-balancing is enabled, the
  # events are distributed to the servers in the list. If one server becomes
  # unreachable, the events are distributed to the reachable servers only.
  # The hosts setting supports redis and rediss urls with custom password like
  # redis://:password@localhost:6379.
  #hosts: ["localhost:6379"]

  # The name of the Redis list or channel the events are published to. The
  # default is filebeat.
  #key: filebeat

  # The password to authenticate to Redis with. The default is no authentication.
  #password:

  # The Redis database number where the events are published. The default is 0.
  #db: 0

  # The Redis data type to use for publishing events. If the data type is list,
  # the Redis RPUSH command is used. If the data type is channel, the Redis
  # PUBLISH command is used. The default value is list.
  #datatype: list

  # The number of workers to use for each host configured to publish events to
  # Redis. Use this setting along with the loadbalance option. For example, if
  # you have 2 hosts and 3 workers, in total 6 workers are started (3 for each
  # host).
  #worker: 1

  # If set to true and multiple hosts or workers are configured, the output
  # plugin load balances published events onto all Redis hosts. If set to false,
  # the output plugin sends all events to only one host (determined at random)
  # and will switch to another host if the currently selected one becomes
  # unreachable. The default value is true.
  #loadbalance: true

  # The Redis connection timeout in seconds. The default is 5 seconds.
  #timeout: 5s

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published. Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The number of seconds to wait before trying to reconnect to Redis
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Redis after a network error. The default is 60s.
  #backoff.max: 60s

  # The maximum number of events to bulk in a single Redis request or pipeline.
  # The default is 2048.
  #bulk_max_size: 2048

  # The URL of the SOCKS5 proxy to use when connecting to the Redis servers. The
  # value must be a URL with a scheme of socks5://.
  #proxy_url:

  # This option determines whether Redis hostnames are resolved locally when
  # using a proxy. The default value is false, which means that name resolution
  # occurs on the proxy server.
  #proxy_use_local_resolver: false

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Controls the verification of certificates. Valid values are:
  # * full, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate.
  # * strict, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate. If the Subject Alternative
  # Name is empty, it returns an error.
  # * certificate, which verifies that the provided certificate is signed by a
  # trusted authority (CA), but does not perform any hostname verification.
  #  * none, which performs no verification of the server's certificate. This
  # mode disables many of the security benefits of SSL/TLS and should only be used
  # after very careful consideration. It is primarily intended as a temporary
  # diagnostic mechanism when attempting to resolve TLS errors; its use in
  # production environments is strongly discouraged.
  # The default value is full.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256: ""

  # A root CA HEX encoded fingerprint. During the SSL handshake if the
  # fingerprint matches the root CA certificate, it will be added to
  # the provided list of root CAs (`certificate_authorities`), if the
  # list is empty or not defined, the matching certificate will be the
  # only one in the list. Then the normal SSL validation happens.
  #ssl.ca_trusted_fingerprint: ""


# -------------------------------- File Output ---------------------------------
#output.file:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Configure JSON encoding
  #codec.json:
    # Pretty-print JSON event
    #pretty: false

    # Configure escaping HTML symbols in strings.
    #escape_html: false

  # Path to the directory where to save the generated files. The option is
  # mandatory.
  #path: "/tmp/filebeat"

  # Name of the generated files. The default is `filebeat` and it generates
  # files: `filebeat-{datetime}.ndjson`, `filebeat-{datetime}-1.ndjson`, etc.
  #filename: filebeat

  # Maximum size in kilobytes of each file. When this size is reached, and on
  # every Filebeat restart, the files are rotated. The default value is 10240
  # kB.
  #rotate_every_kb: 10000

  # Maximum number of files under path. When this number of files is reached,
  # the oldest file is deleted and the rest are shifted from last to first. The
  # default is 7 files.
  #number_of_files: 7

  # Permissions to use for file creation. The default is 0600.
  #permissions: 0600
  
  # Configure automatic file rotation on every startup. The default is true.
  #rotate_on_startup: true

# ------------------------------- Console Output -------------------------------
#output.console:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Configure JSON encoding
  #codec.json:
    # Pretty-print JSON event
    #pretty: false

    # Configure escaping HTML symbols in strings.
    #escape_html: false

# =================================== Paths ====================================

# The home path for the Filebeat installation. This is the default base path
# for all other path settings and for miscellaneous files that come with the
# distribution (for example, the sample dashboards).
# If not set by a CLI flag or in the configuration file, the default for the
# home path is the location of the binary.
#path.home:

# The configuration path for the Filebeat installation. This is the default
# base path for configuration files, including the main YAML configuration file
# and the Elasticsearch template file. If not set by a CLI flag or in the
# configuration file, the default for the configuration path is the home path.
#path.config: ${path.home}

# The data path for the Filebeat installation. This is the default base path
# for all the files in which Filebeat needs to store its data. If not set by a
# CLI flag or in the configuration file, the default for the data path is a data
# subdirectory inside the home path.
#path.data: ${path.home}/data

# The logs path for a Filebeat installation. This is the default location for
# the Beat's log files. If not set by a CLI flag or in the configuration file,
# the default for the logs path is a logs subdirectory inside the home path.
#path.logs: ${path.home}/logs

# ================================== Keystore ==================================

# Location of the Keystore containing the keys and their sensitive values.
#keystore.path: "${path.config}/beats.keystore"

# ================================= Dashboards =================================

# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards are disabled by default and can be enabled either by setting the
# options here or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The directory from where to read the dashboards. The default is the `kibana`
# folder in the home path.
#setup.dashboards.directory: ${path.home}/kibana

# The URL from where to download the dashboard archive. It is used instead of
# the directory if it has a value.
#setup.dashboards.url:

# The file archive (zip file) from where to read the dashboards. It is used instead
# of the directory when it has a value.
#setup.dashboards.file:

# In case the archive contains the dashboards from multiple Beats, this lets you
# select which one to load. You can load all the dashboards in the archive by
# setting this to the empty string.
#setup.dashboards.beat: filebeat

# The name of the Kibana index to use for setting the configuration. Default is ".kibana"
#setup.dashboards.kibana_index: .kibana

# The Elasticsearch index name. This overwrites the index name defined in the
# dashboards and index pattern. Example: testbeat-*
#setup.dashboards.index:

# Always use the Kibana API for loading the dashboards instead of autodetecting
# how to install the dashboards by first querying Elasticsearch.
#setup.dashboards.always_kibana: false

# If true and Kibana is not reachable at the time when dashboards are loaded,
# it will retry to reconnect to Kibana instead of exiting with an error.
#setup.dashboards.retry.enabled: false

# Duration interval between Kibana connection retries.
#setup.dashboards.retry.interval: 1s

# Maximum number of retries before exiting with an error, 0 for unlimited retrying.
#setup.dashboards.retry.maximum: 0

# ================================== Template ==================================

# A template is used to set the mapping in Elasticsearch
# By default template loading is enabled and the template is loaded.
# These settings can be adjusted to load your own template or overwrite existing ones.

# Set to false to disable template loading.
#setup.template.enabled: true

# Template name. By default the template name is "filebeat-%{[agent.version]}"
# The template name and pattern has to be set in case the Elasticsearch index pattern is modified.
#setup.template.name: "filebeat-%{[agent.version]}"

# Template pattern. By default the template pattern is "filebeat-%{[agent.version]}" to apply to the default index settings.
# The template name and pattern has to be set in case the Elasticsearch index pattern is modified.
#setup.template.pattern: "filebeat-%{[agent.version]}"

# Path to fields.yml file to generate the template
#setup.template.fields: "${path.config}/fields.yml"

# A list of fields to be added to the template and Kibana index pattern. Also
# specify setup.template.overwrite: true to overwrite the existing template.
#setup.template.append_fields:
#- name: field_name
#  type: field_type

# Enable JSON template loading. If this is enabled, the fields.yml is ignored.
#setup.template.json.enabled: false

# Path to the JSON template file
#setup.template.json.path: "${path.config}/template.json"

# Name under which the template is stored in Elasticsearch
#setup.template.json.name: ""

# Set this option if the JSON template is a data stream.
#setup.template.json.data_stream: false

# Overwrite existing template
# Do not enable this option for more than one instance of filebeat as it might
# overload your Elasticsearch with too many update requests.
#setup.template.overwrite: false

# Elasticsearch template settings
setup.template.settings:

  # A dictionary of settings to place into the settings.index dictionary
  # of the Elasticsearch template. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
  #index:
    #number_of_shards: 1
    #codec: best_compression

  # A dictionary of settings for the _source field. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping-source-field.html
  #_source:
    #enabled: false

# ====================== Index Lifecycle Management (ILM) ======================

# Configure index lifecycle management (ILM) to manage the backing indices
# of your data streams.

# Enable ILM support. Valid values are true, or false.
#setup.ilm.enabled: true

# Set the lifecycle policy name. The default policy name is
# 'beatname'.
#setup.ilm.policy_name: "mypolicy"

# The path to a JSON file that contains a lifecycle policy configuration. Used
# to load your own lifecycle policy.
#setup.ilm.policy_file:

# Disable the check for an existing lifecycle policy. The default is true.
# If you set this option to false, lifecycle policy will not be installed,
# even if setup.ilm.overwrite is set to true.
#setup.ilm.check_exists: true

# Overwrite the lifecycle policy at startup. The default is false.
#setup.ilm.overwrite: false

# ======================== Data Stream Lifecycle (DSL) =========================

# Configure Data Stream Lifecycle to manage data streams while connected to Serverless elasticsearch. 
# These settings are mutually exclusive with ILM settings which are not supported in Serverless projects.

# Enable DSL support. Valid values are true, or false.
#setup.dsl.enabled: true

# Set the lifecycle policy name or pattern. For DSL, this name must match the data stream that the lifecycle is for.
# The default data stream pattern is filebeat-%{[agent.version]}"
# The template string `%{[agent.version]}` will resolve to the current stack version. 
# The other possible template value is `%{[beat.name]}`.
#setup.dsl.data_stream_pattern: "filebeat-%{[agent.version]}"

# The path to a JSON file that contains a lifecycle policy configuration. Used
# to load your own lifecycle policy.
# If no custom policy is specified, a default policy with a lifetime of 7 days will be created.
#setup.dsl.policy_file:

# Disable the check for an existing lifecycle policy. The default is true. If
# you disable this check, set setup.dsl.overwrite: true so the lifecycle policy
# can be installed.
#setup.dsl.check_exists: true

# Overwrite the lifecycle policy at startup. The default is false.
#setup.dsl.overwrite: false

# =================================== Kibana ===================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

  # Optional HTTP path
  #path: ""

  # Optional Kibana space ID.
  #space.id: ""

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Controls the verification of certificates. Valid values are:
  # * full, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate.
  # * strict, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate. If the Subject Alternative
  # Name is empty, it returns an error.
  # * certificate, which verifies that the provided certificate is signed by a
  # trusted authority (CA), but does not perform any hostname verification.
  #  * none, which performs no verification of the server's certificate. This
  # mode disables many of the security benefits of SSL/TLS and should only be used
  # after very careful consideration. It is primarily intended as a temporary
  # diagnostic mechanism when attempting to resolve TLS errors; its use in
  # production environments is strongly discouraged.
  # The default value is full.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256: ""

  # A root CA HEX encoded fingerprint. During the SSL handshake if the
  # fingerprint matches the root CA certificate, it will be added to
  # the provided list of root CAs (`certificate_authorities`), if the
  # list is empty or not defined, the matching certificate will be the
  # only one in the list. Then the normal SSL validation happens.
  #ssl.ca_trusted_fingerprint: ""


# ================================== Logging ===================================

# There are four options for the log output: file, stderr, syslog, eventlog
# The file output is the default.

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: info

# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are "beat", "publisher", "service"
# Multiple selectors can be chained.
#logging.selectors: [ ]

# Send all logging output to stderr. The default is false.
#logging.to_stderr: false

# Send all logging output to syslog. The default is false.
#logging.to_syslog: false

# Send all logging output to Windows Event Logs. The default is false.
#logging.to_eventlog: false

# If enabled, Filebeat periodically logs its internal metrics that have changed
# in the last period. For each metric that changed, the delta from the value at
# the beginning of the period is logged. Also, the total values for
# all non-zero internal metrics are logged on shutdown. The default is true.
#logging.metrics.enabled: true

# The period after which to log the internal metrics. The default is 30s.
#logging.metrics.period: 30s

# A list of metrics namespaces to report in the logs. Defaults to [stats].
# `stats` contains general Beat metrics. `dataset` may be present in some
# Beats and contains module or input metrics.
#logging.metrics.namespaces: [stats]

# Logging to rotating files. Set logging.to_files to false to disable logging to
# files.
logging.to_files: true
logging.files:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/filebeat

  # The name of the files where the logs are written to.
  #name: filebeat

  # Configure log file size limit. If the limit is reached, log file will be
  # automatically rotated.
  #rotateeverybytes: 10485760 # = 10MB

  # Number of rotated log files to keep. The oldest files will be deleted first.
  #keepfiles: 7

  # The permissions mask to apply when rotating log files. The default value is 0600.
  # Must be a valid Unix-style file permissions mask expressed in octal notation.
  #permissions: 0600

  # Enable log file rotation on time intervals in addition to the size-based rotation.
  # Intervals must be at least 1s. Values of 1m, 1h, 24h, 7*24h, 30*24h, and 365*24h
  # are boundary-aligned with minutes, hours, days, weeks, months, and years as
  # reported by the local system clock. All other intervals are calculated from the
  # Unix epoch. Defaults to disabled.
  #interval: 0

  # Rotate existing logs on startup rather than appending them to the existing
  # file. Defaults to true.
  # rotateonstartup: true

#=============================== Events Logging ===============================
# Some outputs will log raw events on errors like indexing errors in the
# Elasticsearch output, to prevent logging raw events (that may contain
# sensitive information) together with other log messages, a different
# log file, only for log entries containing raw events, is used. It will
# use the same level, selectors and all other configurations from the
# default logger, but it will have it's own file configuration.
#
# Having a different log file for raw events also prevents event data
# from drowning out the regular log files.
#
# IMPORTANT: No matter the default logger output configuration, raw events
# will **always** be logged to a file configured by `logging.event_data.files`.

# logging.event_data:
# Logging to rotating files. Set logging.to_files to false to disable logging to
# files.
#logging.event_data.to_files: true
#logging.event_data:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/filebeat

  # The name of the files where the logs are written to.
  #name: filebeat-events-data

  # Configure log file size limit. If the limit is reached, log file will be
  # automatically rotated.
  #rotateeverybytes: 5242880 # = 5MB

  # Number of rotated log files to keep. The oldest files will be deleted first.
  #keepfiles: 2

  # The permissions mask to apply when rotating log files. The default value is 0600.
  # Must be a valid Unix-style file permissions mask expressed in octal notation.
  #permissions: 0600

  # Enable log file rotation on time intervals in addition to the size-based rotation.
  # Intervals must be at least 1s. Values of 1m, 1h, 24h, 7*24h, 30*24h, and 365*24h
  # are boundary-aligned with minutes, hours, days, weeks, months, and years as
  # reported by the local system clock. All other intervals are calculated from the
  # Unix epoch. Defaults to disabled.
  #interval: 0

  # Rotate existing logs on startup rather than appending them to the existing
  # file. Defaults to false.
  # rotateonstartup: false

# ============================= X-Pack Monitoring ==============================
# Filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster.  This requires xpack monitoring to be enabled in Elasticsearch.  The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#monitoring.enabled: false

# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify an additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  #hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Protocol - either `http` (default) or `https`.
  #protocol: "https"

  # Authentication credentials - either API key or username/password.
  #api_key: "id:api_key"
  #username: "beats_system"
  #password: "changeme"

  # Dictionary of HTTP parameters to pass within the URL with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # The number of seconds to wait before trying to reconnect to Elasticsearch
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Elasticsearch after a network error. The default is 60s.
  #backoff.max: 60s

  # Configure HTTP request timeout before failing a request to Elasticsearch.
  #timeout: 90

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Controls the verification of certificates. Valid values are:
  # * full, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate.
  # * strict, which verifies that the provided certificate is signed by a trusted
  # authority (CA) and also verifies that the server's hostname (or IP address)
  # matches the names identified within the certificate. If the Subject Alternative
  # Name is empty, it returns an error.
  # * certificate, which verifies that the provided certificate is signed by a
  # trusted authority (CA), but does not perform any hostname verification.
  #  * none, which performs no verification of the server's certificate. This
  # mode disables many of the security benefits of SSL/TLS and should only be used
  # after very careful consideration. It is primarily intended as a temporary
  # diagnostic mechanism when attempting to resolve TLS errors; its use in
  # production environments is strongly discouraged.
  # The default value is full.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions from 1.1
  # up to 1.3 are enabled.
  #ssl.supported_protocols: [TLSv1.1, TLSv1.2, TLSv1.3]

  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client certificate key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the certificate key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE-based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  # Configure a pin that can be used to do extra validation of the verified certificate chain,
  # this allow you to ensure that a specific certificate is used to validate the chain of trust.
  #
  # The pin is a base64 encoded string of the SHA-256 fingerprint.
  #ssl.ca_sha256: ""

  # A root CA HEX encoded fingerprint. During the SSL handshake if the
  # fingerprint matches the root CA certificate, it will be added to
  # the provided list of root CAs (`certificate_authorities`), if the
  # list is empty or not defined, the matching certificate will be the
  # only one in the list. Then the normal SSL validation happens.
  #ssl.ca_trusted_fingerprint: ""

  # Enable Kerberos support. Kerberos is automatically enabled if any Kerberos setting is set.
  #kerberos.enabled: true

  # Authentication type to use with Kerberos. Available options: keytab, password.
  #kerberos.auth_type: password

  # Path to the keytab file. It is used when auth_type is set to keytab.
  #kerberos.keytab: /etc/elastic.keytab

  # Path to the Kerberos configuration.
  #kerberos.config_path: /etc/krb5.conf

  # Name of the Kerberos user.
  #kerberos.username: elastic

  # Password of the Kerberos user. It is used when auth_type is set to password.
  #kerberos.password: changeme

  # Kerberos realm.
  #kerberos.realm: ELASTIC

  #metrics.period: 10s
  #state.period: 1m

# The `monitoring.cloud.id` setting overwrites the `monitoring.elasticsearch.hosts`
# setting. You can find the value for this setting in the Elastic Cloud web UI.
#monitoring.cloud.id:

# The `monitoring.cloud.auth` setting overwrites the `monitoring.elasticsearch.username`
# and `monitoring.elasticsearch.password` settings. The format is `<user>:<pass>`.
#monitoring.cloud.auth:

# =============================== HTTP Endpoint ================================

# Each beat can expose internal metrics through an HTTP endpoint. For security
# reasons the endpoint is disabled by default. This feature is currently experimental.
# Stats can be accessed through http://localhost:5066/stats. For pretty JSON output
# append ?pretty to the URL.

# Defines if the HTTP endpoint is enabled.
#http.enabled: false

# The HTTP endpoint will bind to this hostname, IP address, unix socket, or named pipe.
# When using IP addresses, it is recommended to only use localhost.
#http.host: localhost

# Port on which the HTTP endpoint will bind. Default is 5066.
#http.port: 5066

# Define which user should be owning the named pipe.
#http.named_pipe.user:

# Define which permissions should be applied to the named pipe, use the Security
# Descriptor Definition Language (SDDL) to define the permission. This option cannot be used with
# `http.user`.
#http.named_pipe.security_descriptor:

# Defines if the HTTP pprof endpoints are enabled.
# It is recommended that this is only enabled on localhost as these endpoints may leak data.
#http.pprof.enabled: false

# Controls the fraction of goroutine blocking events that are reported in the
# blocking profile.
#http.pprof.block_profile_rate: 0

# Controls the fraction of memory allocations that are recorded and reported in
# the memory profile.
#http.pprof.mem_profile_rate: 524288

# Controls the fraction of mutex contention events that are reported in the
# mutex profile.
#http.pprof.mutex_profile_rate: 0

# ============================== Process Security ==============================

# Enable or disable seccomp system call filtering on Linux. Default is enabled.
#seccomp.enabled: true

# ============================== Instrumentation ===============================

# Instrumentation support for the filebeat.
#instrumentation:
    # Set to true to enable instrumentation of filebeat.
    #enabled: false

    # Environment in which filebeat is running on (eg: staging, production, etc.)
    #environment: ""

    # APM Server hosts to report instrumentation results to.
    #hosts:
    #  - http://localhost:8200

    # API Key for the APM Server(s).
    # If api_key is set then secret_token will be ignored.
    #api_key:

    # Secret token for the APM Server(s).
    #secret_token:

    # Enable profiling of the server, recording profile samples as events.
    #
    # This feature is experimental.
    #profiling:
        #cpu:
            # Set to true to enable CPU profiling.
            #enabled: false
            #interval: 60s
            #duration: 10s
        #heap:
            # Set to true to enable heap profiling.
            #enabled: false
            #interval: 60s

# ================================= Migration ==================================

# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: false

# =============================== Feature Flags ================================

# Enable and configure feature flags.
#features:
#  fqdn:
#    enabled: true

